An entry is only as true as the day it was written.
Flags move on the server after a release ships. Anthropic's own notes land days later and their documentation later still. Sometimes an entry turns out to be wrong and gets corrected by hand. All of that is recorded against the entry it happened to, and this is the whole of it in the order it happened.
Nothing here replaces an entry. Every line links to the page its release published, still saying what that release said, because a correction is added and dated rather than swapped in.
| When | Entry | What happened |
|---|---|---|
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_nifty_lemur, read as this account. | |
v2.1.251tengu_juniper_relay |
Flag reading movedThe flag server now returns off for tengu_juniper_relay, read as this account. | |
v2.1.223tengu_juniper_relay |
Flag reading movedThe flag server now returns off for tengu_juniper_relay, read as this account. | |
v2.1.206tengu_umber_kestrel |
Flag reading movedThe flag server now returns on for tengu_umber_kestrel, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"allowanceNote":"{percent} allowance left","budgetExhaustedCopy":"You've used this week's lower-priority allowance","cooloffMinutes":10,"enabled":true,"label":"Continue now at lower priority","noticeLine":"/low-priority to continue now at lower priority · uses your weekly limit","statusLine":"Lower priority until {reset}","version":3,"waitBanner":"Working at lower priority · waiting for capacity"} for tengu_toasty_breeze, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"allowanceNote":"{percent} allowance left","budgetExhaustedCopy":"You've used this week's lower-priority allowance","cooloffMinutes":10,"enabled":true,"label":"Continue now at lower priority","noticeLine":"/low-priority to continue now at lower priority · uses your weekly limit","statusLine":"Lower priority until {reset}","version":3,"waitBanner":"Working at lower priority · waiting for capacity"} for tengu_toasty_breeze, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"autoContinue":true,"enabled":true,"label":"Reset your session limit now","noticeLine":"/limit-reset to reset your session limit now · uses weekly limit · 1/week","spentLine":"Weekly reset used · available again {date}","successLine":"Session limit reset · next reset available {date} · your weekly limit still applies","unavailableLine":"Couldn't reset your session limit right now · try again in a moment","version":1} for tengu_nifty_lemur, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"autoContinue":true,"enabled":true,"label":"Reset your session limit now","noticeLine":"/limit-reset to reset your session limit now · uses weekly limit · 1/week","spentLine":"Weekly reset used · available again {date}","successLine":"Session limit reset · next reset available {date} · your weekly limit still applies","unavailableLine":"Couldn't reset your session limit right now · try again in a moment","version":1} for tengu_nifty_lemur, read as this account. | |
v2.1.251tengu_juniper_relay |
Flag reading movedThe flag server now returns on for tengu_juniper_relay, read as this account. | |
v2.1.223tengu_juniper_relay |
Flag reading movedThe flag server now returns on for tengu_juniper_relay, read as this account. | |
v2.1.206tengu_umber_kestrel |
Flag reading movedThe flag server now returns off for tengu_umber_kestrel, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_toasty_breeze, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_toasty_breeze, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_nifty_lemur, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_nifty_lemur, read as this account. | |
v2.1.251tengu_juniper_relay |
Flag reading movedThe flag server now returns off for tengu_juniper_relay, read as this account. | |
v2.1.223tengu_juniper_relay |
Flag reading movedThe flag server now returns off for tengu_juniper_relay, read as this account. | |
v2.1.206tengu_umber_kestrel |
Flag reading movedThe flag server now returns on for tengu_umber_kestrel, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"allowanceNote":"{percent} allowance left","budgetExhaustedCopy":"You've used this week's lower-priority allowance","cooloffMinutes":10,"enabled":true,"label":"Continue now at lower priority","noticeLine":"/low-priority to continue now at lower priority · uses your weekly limit","statusLine":"Lower priority until {reset}","version":3,"waitBanner":"Working at lower priority · waiting for capacity"} for tengu_toasty_breeze, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"allowanceNote":"{percent} allowance left","budgetExhaustedCopy":"You've used this week's lower-priority allowance","cooloffMinutes":10,"enabled":true,"label":"Continue now at lower priority","noticeLine":"/low-priority to continue now at lower priority · uses your weekly limit","statusLine":"Lower priority until {reset}","version":3,"waitBanner":"Working at lower priority · waiting for capacity"} for tengu_toasty_breeze, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"autoContinue":true,"enabled":true,"label":"Reset your session limit now","noticeLine":"/limit-reset to reset your session limit now · uses weekly limit · 1/week","spentLine":"Weekly reset used · available again {date}","successLine":"Session limit reset · next reset available {date} · your weekly limit still applies","unavailableLine":"Couldn't reset your session limit right now · try again in a moment","version":1} for tengu_nifty_lemur, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"autoContinue":true,"enabled":true,"label":"Reset your session limit now","noticeLine":"/limit-reset to reset your session limit now · uses weekly limit · 1/week","spentLine":"Weekly reset used · available again {date}","successLine":"Session limit reset · next reset available {date} · your weekly limit still applies","unavailableLine":"Couldn't reset your session limit right now · try again in a moment","version":1} for tengu_nifty_lemur, read as this account. | |
v2.1.251tengu_juniper_relay |
Flag reading movedThe flag server now returns on for tengu_juniper_relay, read as this account. | |
v2.1.223tengu_juniper_relay |
Flag reading movedThe flag server now returns on for tengu_juniper_relay, read as this account. | |
v2.1.265BigQuery |
Documentation arrivedA small documentation edit on Network requirements touched a line naming BigQuery after this was published.
the line in the docs<Note>If your Google Cloud project uses VPC Service Controls, an IP-based access level doesn't admit Claude's queries through the [BigQuery connection](/docs/claude-tag/admins/connections/bigquery). See [Allow the connection through a VPC … |
|
v2.1.265BigQuery |
Documentation arrivedAnthropic's documentation has since written up BigQuery, on Connect BigQuery.
the line in the docsIf the Google Cloud project that holds your BigQuery data is inside a [VPC Service Controls](https://cloud.google.com/vpc-service-controls/docs/overview) perimeter, Claude's queries fail with `Request is prohibited by organization's policy… |
|
v2.1.282CLAUDE_CONFIG_DIR |
Documentation arrivedAnthropic's documentation has since written up CLAUDE_CONFIG_DIR, on Error reference.
the line in the docsWindows reported an error (EBADF) when Claude Code read this session's transcript file, although the file had opened normally. This can happen when other software intercepts file reads — security, encryption or endpoint-management tools, f… |
|
v2.1.282/feedback |
Documentation arrivedAnthropic's documentation has since written up /feedback, on Error reference.
the line in the docsYou sent a report from the [`/feedback`, `/bug`, or `/share` dialog](/docs/en/commands#all-commands) and the upload to Anthropic failed. The dialog keeps your text so you can retry. |
|
v2.1.257disableRemoteControl |
Documentation arrivedAnthropic's documentation has since written up disableRemoteControl, on Continue local sessions from any device with Remote Control.
the line in the docs* **The error mentions `disableRemoteControl`**: your IT administrator has disabled Remote Control on this device through [managed settings](/docs/en/managed-settings), independent of the organization-wide toggle and of how you're signed i… |
|
v2.1.257disableRemoteControl |
Documentation arrivedAnthropic's documentation has since written up disableRemoteControl, on Continue local sessions from any device with Remote Control.
the line in the docs* **The error mentions `disableRemoteControl`**: your IT administrator has disabled Remote Control on this device through [managed settings](/docs/en/managed-settings), independent of the organization-wide toggle and of how you're signed i… |
|
v2.1.251disableRemoteControl |
Documentation arrivedAnthropic's documentation has since written up disableRemoteControl, on Continue local sessions from any device with Remote Control.
the line in the docs* **The error mentions `disableRemoteControl`**: your IT administrator has disabled Remote Control on this device through [managed settings](/docs/en/managed-settings), independent of the organization-wide toggle and of how you're signed i… |
|
v2.1.280claude auth login |
Documentation arrivedAnthropic's documentation has since written up claude auth login, on Continue local sessions from any device with Remote Control.
the line in the docsRun `claude auth login` and choose the claude.ai option. If the message names `ANTHROPIC_API_KEY` or `ANTHROPIC_AUTH_TOKEN`, remove it wherever it's set: your shell environment or the `env` block of a [settings file](/docs/en/settings-refe… |
|
v2.1.274claude auth login |
Documentation arrivedAnthropic's documentation has since written up claude auth login, on Continue local sessions from any device with Remote Control.
the line in the docsRun `claude auth login` and choose the claude.ai option. If the message names `ANTHROPIC_API_KEY` or `ANTHROPIC_AUTH_TOKEN`, remove it wherever it's set: your shell environment or the `env` block of a [settings file](/docs/en/settings-refe… |
|
v2.1.282/focus |
Documentation arrivedAnthropic's documentation has since written up /focus, on Continue local sessions from any device with Remote Control.
the line in the docs* `/focus`, from v2.1.281: pass `on` or `off` as an argument, for example `/focus on`, or run it with no argument to toggle the [focus view](/docs/en/commands#all-commands). Both forms apply to the current session only and leave your saved… |
|
v2.1.281/focus |
Documentation arrivedAnthropic's documentation has since written up /focus, on Continue local sessions from any device with Remote Control.
the line in the docs* `/focus`, from v2.1.281: pass `on` or `off` as an argument, for example `/focus on`, or run it with no argument to toggle the [focus view](/docs/en/commands#all-commands). Both forms apply to the current session only and leave your saved… |
|
v2.1.269/focus |
Documentation arrivedAnthropic's documentation has since written up /focus, on Continue local sessions from any device with Remote Control.
the line in the docs* `/focus`, from v2.1.281: pass `on` or `off` as an argument, for example `/focus on`, or run it with no argument to toggle the [focus view](/docs/en/commands#all-commands). Both forms apply to the current session only and leave your saved… |
|
v2.1.282/recap |
Documentation arrivedAnthropic's documentation has since written up /recap, on Continue local sessions from any device with Remote Control.
the line in the docs* Text-output commands: `/compact`, `/clear`, `/context`, `/usage`, `/exit`, `/usage-credits`, `/recap`, and `/reload-plugins`. `/usage-credits` prints the billing URL instead of opening a browser. `/reload-plugins` works only when the ses… |
|
v2.1.281/usage-credits |
Documentation arrivedAnthropic's documentation has since written up /usage-credits, on Continue local sessions from any device with Remote Control.
the line in the docs* Text-output commands: `/compact`, `/clear`, `/context`, `/usage`, `/exit`, `/usage-credits`, `/recap`, and `/reload-plugins`. `/usage-credits` prints the billing URL instead of opening a browser. `/reload-plugins` works only when the ses… |
|
v2.1.282/resume |
Documentation arrivedAnthropic's documentation has since written up /resume, on Continue local sessions from any device with Remote Control.
the line in the docs* **Some commands are local-only**: commands that only run in the terminal interface, such as `/plugin` or `/resume`, work only from the local CLI, whether or not you pass an argument. The following work from mobile and web: |
|
v2.1.282/effort |
Documentation arrivedAnthropic's documentation has since written up /effort, on Continue local sessions from any device with Remote Control.
the line in the docs* **Effort level**: when you set the [effort level](/docs/en/model-config#adjust-effort-level) from a connected device, with `/effort` or the device's effort control, Claude Code applies it to the session on your machine. If you pinned a l… |
|
v2.1.206tengu_umber_kestrel |
Flag reading movedThe flag server now returns off for tengu_umber_kestrel, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_toasty_breeze, read as this account. | |
v2.1.239tengu_toasty_breeze |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_toasty_breeze, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_nifty_lemur, read as this account. | |
v2.1.248tengu_nifty_lemur |
Flag reading movedThe flag server now returns {"enabled":false,"version":0} for tengu_nifty_lemur, read as this account. | |
v2.1.251tengu_juniper_relay |
Flag reading movedThe flag server now returns off for tengu_juniper_relay, read as this account. | |
v2.1.223tengu_juniper_relay |
Flag reading movedThe flag server now returns off for tengu_juniper_relay, read as this account. | |
v2.1.282autoMode |
Documentation arrivedA small documentation edit on Configure auto mode touched a line naming autoMode after this was published.
the line in the docsSet `autoMode.classifyAllShell` to `true` to suspend every Bash and PowerShell allow rule while auto mode is active, so the classifier evaluates every shell command regardless of your allow list, except [critical-path removals](/docs/en/pe… |
|
v2.1.257permissions.defaultMode |
Documentation arrivedA small documentation edit on Set up Claude Code for your organization touched a line naming permissions.defaultMode after this was published.
the line in the docs| [Starting permission mode](/docs/en/permission-modes#which-mode-a-session-starts-in) | Choose the permission mode your developers' terminal sessions start in instead of the built-in starting permission mode, or remove auto mode. [Switch … |
|
v2.1.257permissions.defaultMode |
Documentation arrivedA small documentation edit on Set up Claude Code for your organization touched a line naming permissions.defaultMode after this was published.
the line in the docs| [Starting permission mode](/docs/en/permission-modes#which-mode-a-session-starts-in) | Choose the permission mode your developers' terminal sessions start in instead of the built-in starting permission mode, or remove auto mode. [Switch … |