HomeDocs changes
Documentation changes
What the docs quietly changed.
Anthropic's published documentation, fetched on a schedule and diffed against the last copy. Every edit dated, including the ones that never made a release note.
Last poll read all 4 cleanly: Claude Code CLI, Claude Developer Platform, Claude Documentation, Model Context Protocol. A date here is when this site noticed, not when Anthropic edited.
Claude Developer Platform
812pages tracked
765 changed this week · last read 23 Oct 2026
Claude Code CLI
228pages tracked
147 changed this week · last read 23 Oct 2026
Claude Documentation
280pages tracked
77 changed this week · last read 23 Oct 2026
Model Context Protocol
357pages tracked
171 changed this week · last read 22 Oct 2026
100 on this page
5,591 of the ledger's changes in claude-code. Show every change
ReadSourcePageWhatLines
2 Oct 2026
91 pages
+2800 −1383 lines
claude-code
security
±changed
+1−1
claude-codechanged
security
* **Branch restrictions**: Git push operations are restricted to the current working branch
* **Push restrictions**: The [GitHub proxy](/docs/en/cloud-environments#github-proxy) rejects branch deletions and pushes of anything other than a branch, such as a tag. GitHub dec
+1 −1 lines
Upstream edited 2 Oct 2026 02:41 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
routines
±changed
+1−5
claude-codechanged
routines
Claude pushes its work to branches prefixed with `claude/`, which are always accepted. When your prompt directs Claude to push to another branch, Claude Code checks the push first
* The branch is protected on GitHub
* Someone else has an open pull request from that branch
* The branch carries commits authored by someone other than you
+1 −5 lines
Upstream edited 2 Oct 2026 02:41 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
cloud-environments
±changed
+1−1
claude-codechanged
cloud-environments
* **Push protection**: `git push` works only against the session's current working branch; cloning, fetching, and PR operations work normally.
* **Push restrictions**: the proxy rejects branch deletions and pushes of anything other than a branch, such as a tag. It doesn't limit which branches a push can update. To do that
+1 −1 lines
Upstream edited 2 Oct 2026 02:41 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
tools-reference
±changed
+2−0
claude-codechanged
tools-reference
When the URL is a claude.ai [artifact](/docs/en/artifacts) link, Claude Code can also ask for approval to read the artifact itself. For the cases where it asks, see [Read an artifa
+2 −0 lines
Upstream edited 2 Oct 2026 02:41 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
permission-modes
±changed
+2−1
claude-codechanged
permission-modes
* When Claude reads an [artifact someone else made](/docs/en/artifacts#read-an-artifact-shared-with-you), the approval cases listed in that section apply
The [actions no mode auto-approves](#actions-no-mode-auto-approves) still prompt in this mode. The [Remove-Item in PowerShell](#remove-item-in-powershell) denies also apply in this
The [actions no mode auto-approves](#actions-no-mode-auto-approves) still prompt in this mode. Reading [another organization's public artifact](/docs/en/artifacts#read-an-artifact-
+2 −1 lines
Upstream edited 2 Oct 2026 02:41 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
artifacts
±changed
+9−0
claude-codechanged
artifacts
Claude Code asks for your approval before Claude reads the artifact in these cases, in addition to any prompt your permission mode or rules call for:
* **Cloud session without network access**: for a [cloud environment](/docs/en/cloud-environments#access-levels), that's the **None** level. In [auto mode](/docs/en/permission-mode
* **Another organization's public artifact**: Claude Code asks you first, even in auto mode. Where Claude Code can't ask you, such as in `bypassPermissions` mode, Claude can't read
+9 −0 lines
Upstream edited 2 Oct 2026 02:41 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
model-config
±changed
+13−1
claude-codechanged
model-config
#### Effort level after a fallback
When Claude Code switches your session to the fallback model, it keeps the effort level the flagged request ran at in place of that model's default effort. For example, a session o
A different level applies in cases such as these:
+13 −1 lines
Upstream edited 2 Oct 2026 02:40 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
vs-code
±changed
+17−3
claude-codechanged
vs-code
If the conversation is open in another Claude Code process, such as `claude` in a terminal or another VS Code window, a notice appears in place of the prompt box: `This conversatio
### Continue conversations after a reload
If another Claude Code process still has the conversation open, you're asked before it opens here, with the same **Open here anyway** notice as when you [resume it from session his
+17 −3 lines
Upstream edited 2 Oct 2026 02:39 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
errors
±changed
+1−1
claude-codechanged
errors
* `The response stream was malformed`: an event arrived for a content block that had already finished, or an event arrived damaged. A damaged event is one whose data isn't valid JS
* `The response stream was malformed`: an event arrived for a content block that had already finished, or an event arrived damaged. A damaged event is one whose data isn't valid JS
+1 −1 lines
Upstream edited 2 Oct 2026 02:39 UTC Recorded here 2 Oct 2026 03:07 UTC
claude-code
claude-tag
±changed
+2−2
claude-codechanged
claude-tag
No line of the body moved in this read.
+2 −2 lines
Recorded here 2 Oct 2026 02:37 UTC
claude-code
permission-modes
±changed
+1−1
claude-codechanged
permission-modes
The classifier runs on Claude Sonnet 5 by default rather than on your `/model` selection. A classifier model that Anthropic configures server-side takes precedence over that de
The classifier runs on Claude Sonnet 5 by default rather than on your `/model` selection. A classifier model that Anthropic configures server-side takes precedence over that de
+1 −1 lines
Upstream edited 2 Oct 2026 02:36 UTC Recorded here 2 Oct 2026 02:37 UTC
claude-code
model-config
±changed
+1−1
claude-codechanged
model-config
* **[Auto mode classifier](/docs/en/permission-modes#eliminate-prompts-with-auto-mode)**: the classifier's Claude Sonnet 5 default applies only when the allowlist permits Sonnet 5.
* **[Auto mode classifier](/docs/en/permission-modes#eliminate-prompts-with-auto-mode)**: the classifier's Claude Sonnet 5 default applies only when the allowlist permits Sonnet 5.
+1 −1 lines
Upstream edited 2 Oct 2026 02:36 UTC Recorded here 2 Oct 2026 02:37 UTC
claude-code
desktop-linux
±changed
+32−36
claude-codechanged
desktop-linux
<Note>
Linux support for the Claude desktop app is in beta.
</Note>
> [!NOTE]
>
+32 −36 lines
Upstream edited 2 Oct 2026 02:35 UTC Recorded here 20 Oct 2026 18:37 UTC
claude-code
desktop-linux
±changed
+1−1
claude-codechanged
desktop-linux
Installing the `.deb` also registers Anthropic's apt repository at `/etc/apt/sources.list.d/claude-desktop.list`, so future updates arrive with your system's [regular package updat
The `.deb` contains Anthropic's signing key and installs it at `/usr/share/keyrings/claude-desktop-archive-keyring.asc`, so you don't need to download the key yourself. Unless you
+1 −1 lines
Upstream edited 2 Oct 2026 02:35 UTC Recorded here 2 Oct 2026 02:37 UTC
claude-code
settings-reference
±changed
+10−6
claude-codechanged
settings-reference
| [`sandbox.enableWeakerNetworkIsolation`](#sandbox-enableweakernetworkisolation) | Let `gh`, `gcloud`, and `terraform` verify TLS behind a MITM proxy inside the [sandbox](/docs/en
| [`sandbox.enableWeakerNetworkIsolation`](#sandbox-enableweakernetworkisolation) | Let `gh`, `gcloud`, and `terraform` verify TLS behind a MITM proxy inside the [sandbox](/docs/en
Linux and WSL2 only. See [Bubblewrap fails to start inside a container](/docs/en/sandboxing#troubleshooting).
Linux and WSL2 only. See [Bubblewrap fails to start inside a container](/docs/en/sandboxing#bubblewrap-fails-to-start-inside-a-container).
If you don't use a MITM proxy, list the failing tools in [`excludedCommands`](#sandbox-excludedcommands) instead; see [Go-based CLIs fail TLS verification on macOS](/docs/en/sandbo
+10 −6 lines
Upstream edited 2 Oct 2026 02:27 UTC Recorded here 2 Oct 2026 02:37 UTC
claude-code
sandboxing
±changed
+107−162
claude-codechanged
sandboxing
If sandboxed commands fail with `Operation not permitted` inside a container, see the Bubblewrap entry under [Troubleshooting](#troubleshooting).
If sandboxed commands fail with `Operation not permitted` inside a container, see [Bubblewrap fails to start inside a container](#bubblewrap-fails-to-start-inside-a-container).
* A bare `Bash` ask rule, or the equivalent `Bash(*)` form, is skipped for commands that run sandboxed; it still applies to commands that fall back to the regular permission flow.
* A bare `Bash` ask rule, or the equivalent `Bash(*)` form, is skipped for commands that run sandboxed; it still applies to commands that fall back to the regular permission flow.
In plan mode, auto-allow doesn't widen approvals; see [plan mode](/docs/en/permission-modes#analyze-before-you-edit-with-plan-mode) for how Claude Code gates commands while you p
+107 −162 lines
Upstream edited 2 Oct 2026 02:27 UTC Recorded here 2 Oct 2026 02:37 UTC
claude-code
sandbox-environments
±changed
+1−1
claude-codechanged
sandbox-environments
You can layer the built-in Bash sandbox inside the container for per-command restrictions. Unprivileged containers need the nested-sandbox setting described in [Sandboxing troubles
You can layer the built-in Bash sandbox inside the container for per-command restrictions. Unprivileged containers need `enableWeakerNestedSandbox`, described in [Bubblewrap fails
+1 −1 lines
Upstream edited 2 Oct 2026 02:27 UTC Recorded here 2 Oct 2026 02:37 UTC
claude-code
claude-tag
±changed
+1−1
claude-codechanged
claude-tag
No line of the body moved in this read.
+1 −1 lines
Recorded here 2 Oct 2026 01:37 UTC
claude-code
claude-tag
±changed
+2−2
claude-codechanged
claude-tag
No line of the body moved in this read.
+2 −2 lines
Recorded here 2 Oct 2026 00:37 UTC
claude-code
settings-example
±changed
+320−330
claude-codechanged
settings-example
<Tabs>
<Tab title="Copyable settings file">
Save this as `~/.claude/settings.json`. It's valid JSON with no comments, so you can paste it as is and delete the keys you don't want.
```json ~/.claude/settings.json theme={null}
+320 −330 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 20 Oct 2026 18:37 UTC
claude-code
settings-reference
±changed
+57−49
claude-codechanged
settings-reference
| [`sandbox.network.allowLocalBinding`](#sandbox-network-allowlocalbinding) | Let [sandboxed](/docs/en/sandboxing) commands bind to localhost ports on macOS | Sandbox settings | An
| [`sandbox.network.allowLocalBinding`](#sandbox-network-allowlocalbinding) | Let [sandboxed](/docs/en/sandboxing) commands listen on network ports and connect to localhost on macO
* **Scope**: [`Any file`](#scopes)
* **Scope**: [`Any file`](#scopes), with [limits on the sandbox write access](/docs/en/sandboxing#repository-settings-under-an-admin-required-sandbox) that project and local entrie
Claude Code takes a Boolean key's value from the highest-precedence settings scope that sets it, so a managed `enabled` or `failIfUnavailable` overrides anything a developer sets.
+57 −49 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
settings-example
±changed
+2−2
claude-codechanged
settings-example
// Sandbox commands: writable build dir; npm and example.com pre-allowed, other hosts still prompt
// Sandbox commands: writable build dir; npm and example.com pre-allowed
* `sandbox` sandboxes commands with a fixed network allowlist and no unsandboxed retry
* `sandbox` sandboxes commands with a fixed network allowlist and no unsandboxed retry. Its `failIfUnavailable` key [stops Claude Code from starting where the sandbox can't run](/d
+2 −2 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
sandboxing
±changed
+370−61
claude-codechanged
sandboxing
> Learn how Claude Code's sandboxed Bash tool provides filesystem and network isolation for safer, more autonomous agent execution.
The Bash sandbox lets Claude run most shell commands without stopping to ask permission. Instead of approving each command, you define which files and network domains commands can
> Restrict the files and network hosts Claude Code's shell commands can reach with the built-in sandbox. Turn it on, set the boundary, and fix what it breaks.
+370 −61 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
sandbox-environments
±changed
+2−2
claude-codechanged
sandbox-environments
The [`@anthropic-ai/sandbox-runtime`](https://github.com/anthropic-experimental/sandbox-runtime) package wraps an entire process in the same Seatbelt or bubblewrap isolation that t
The [`@anthropic-ai/sandbox-runtime`](https://github.com/anthropics/sandbox-runtime) package wraps an entire process in the same Seatbelt or bubblewrap isolation that the built-in
By default the runtime denies network access and confines writes to a small set of built-in runtime paths, so configure it before launching Claude Code through it. Put your configu
By default the runtime denies network access and confines writes to a small set of built-in runtime paths, so configure it before launching Claude Code through it. Put your configu
+2 −2 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
interactive-mode
±changed
+1−1
claude-codechanged
interactive-mode
Unless your session is one of those listed under [strict sandbox mode](/docs/en/sandboxing#the-unsandboxed-retry-escape-hatch), commands you type in shell mode run outside the [san
Unless your session is one of those listed under [strict sandbox mode](/docs/en/sandboxing#turn-off-the-retry-with-strict-sandbox-mode), commands you type in shell mode run outside
+1 −1 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
agent-sdk/secure-deployment
±changed
+3−3
claude-codechanged
agent-sdk/secure-deployment
For lightweight isolation without containers, [sandbox-runtime](https://github.com/anthropic-experimental/sandbox-runtime) enforces filesystem and network restrictions at the OS le
For lightweight isolation without containers, [sandbox-runtime](https://github.com/anthropics/sandbox-runtime) enforces filesystem and network restrictions at the OS level.
This is the same architecture used by [sandbox-runtime](https://github.com/anthropic-experimental/sandbox-runtime). Even if the agent is compromised via prompt injection, it cannot
This is the same architecture used by [sandbox-runtime](https://github.com/anthropics/sandbox-runtime). Even if the agent is compromised via prompt injection, it cannot exfiltrate
* [Sandbox runtime](https://github.com/anthropic-experimental/sandbox-runtime)
+3 −3 lines
Upstream edited 2 Oct 2026 00:28 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
plugins/troubleshooting
±changed
+29−0
claude-codechanged
plugins/troubleshooting
<h3 id="marketplace-is-added-but-ignored">
`Marketplace "<name>" is added but ignored`
</h3>
+29 −0 lines
Upstream edited 2 Oct 2026 00:14 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
errors
±changed
+2−0
claude-codechanged
errors
| `Marketplace "<name>" is added but ignored` | [Plugin troubleshooting](/docs/en/plugins/troubleshooting#marketplace-is-added-but-ignored) |
| `Marketplace "<name>" is registered but was refused (see the debug log)` | [Plugin troubleshooting](/docs/en/plugins/troubleshooting#marketplace-is-added-but-ignored) |
+2 −0 lines
Upstream edited 2 Oct 2026 00:14 UTC Recorded here 2 Oct 2026 00:37 UTC
claude-code
claude-tag
±changed
+2−2
claude-codechanged
claude-tag
No line of the body moved in this read.
+2 −2 lines
Recorded here 2 Oct 2026 00:07 UTC
1 Oct 2026
90 pages
+5398 −858 lines
claude-code
web-quickstart
±changed
+2−0
claude-codechanged
web-quickstart
When you connect, Claude also links the GitHub accounts you own to your Claude organization, if they have the Claude GitHub App installed. On Team and Enterprise plans, admins
+2 −0 lines
Upstream edited 1 Oct 2026 23:41 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
admin-setup
±changed
+20−1
claude-codechanged
admin-setup
[Cloud sessions](/docs/en/claude-code-on-the-web) have their own admin surface: on the Cloud environments page in admin settings, Owners create [organization-shared environments](/
[Cloud sessions](/docs/en/claude-code-on-the-web) have their own admin surfaces on claude.ai:
* **Cloud environments page**: Owners create [organization-shared environments](/docs/en/cloud-environments#organization-shared-environments) that set the [network access level](/d
* **Default environment**: Owners choose the organization's default environment separately, at [claude.ai/admin-settings/claude-code](https://claude.ai/admin-settings/claude-code).
+20 −1 lines
Upstream edited 1 Oct 2026 23:41 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
skills
±changed
+10−4
claude-codechanged
skills
* Claude Code honors the frontmatter in every kind of session, so an `allowed-tools` grant goes through the normal [permission flow](/docs/en/permissions).
* The frontmatter applies in every kind of session, so an `allowed-tools` grant goes through the normal [permission flow](/docs/en/permissions). If your organization sets `allowMan
Workspace trust doesn't gate this field. Claude Code applies a project skill's `allowed-tools` whenever you or Claude invoke the skill, including in a `-p` run in a folder you've n
Workspace trust doesn't gate this field. Claude Code applies a project skill's `allowed-tools` even in a `-p` run in a folder you've never trusted. A skill can grant itself broad t
+10 −4 lines
Upstream edited 1 Oct 2026 23:39 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
settings-reference
±changed
+9−0
claude-codechanged
settings-reference
When you set this key, Claude Code v2.1.282 or later also ignores the [`allowed-tools`](/docs/en/skills#pre-approve-tools-for-a-skill) frontmatter in skills and `.claude/commands/`
* A repository's `.claude/` directory
* Your `~/.claude/skills/` and `~/.claude/commands/` directories, including [skills synced from claude.ai](/docs/en/skills#where-synced-skills-load)
* An `--add-dir` directory
+9 −0 lines
Upstream edited 1 Oct 2026 23:39 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
agent-sdk/skills
±changed
+1−1
claude-codechanged
agent-sdk/skills
For project and personal skills, Claude Code applies the [`allowed-tools`](/docs/en/skills#pre-approve-tools-for-a-skill) frontmatter field in SDK sessions. You can also pre-appr
In SDK sessions, you can pre-approve tools for a project or personal skill with the skill's [`allowed-tools`](/docs/en/skills#pre-approve-tools-for-a-skill) frontmatter or with t
+1 −1 lines
Upstream edited 1 Oct 2026 23:39 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
plugins/create-marketplace
±changed
+19−19
claude-codechanged
plugins/create-marketplace
Create your own marketplace when you want a group you choose, such as your team or your organization, to install your plugins and keep receiving your updates from a catalog you con
Create your own marketplace when you want a group you choose, such as your team or your organization, to install your plugins and keep receiving your updates from a catalog you con
> * **Sharing one plugin with a few people**: send them the plugin's directory or a `.zip` of it. See [Share a plugin without a marketplace](/docs/en/plugins/publish#share-a-plugin
> * **Offering a plugin to everyone**: submit it to Anthropic's directory. See [Submit to Anthropic's directory](/docs/en/plugins/publish#submit-to-anthropics-directory).
> * **Using a plugin yourself**: load it with `--plugin-dir` or save it in your skills directory. See [Develop without a marketplace](/docs/en/plugins/create#develop-without-a-mark
+19 −19 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 22 Oct 2026 18:07 UTC
claude-code
plugins/create-marketplace
±changed
+94−96
claude-codechanged
plugins/create-marketplace
<Note>
These cases are covered on other pages:
* **Sharing one plugin with a few people**: send them the plugin's directory or a `.zip` of it. See [Share a plugin without a marketplace](/docs/en/plugins/publish#share-a-plugin
* **Offering a plugin to everyone**: submit it to Anthropic's directory. See [Submit to Anthropic's directory](/docs/en/plugins/publish#submit-to-anthropics-directory).
+94 −96 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 20 Oct 2026 18:37 UTC
claude-code
plugins/troubleshooting
±changed
+1−1
claude-codechanged
plugins/troubleshooting
| `Unknown field '<key>'` | The manifest has a field the schema doesn't define. | Remove it, or use the name the message suggests. Claude Code ignores unknown fields at load time.
| `Unknown field '<key>'` | The manifest has a field the schema doesn't define. | Remove it, or use the name the message suggests. Claude Code ignores unknown fields at load time.
+1 −1 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
plugins/marketplace-reference
±changed
+2−2
claude-codechanged
plugins/marketplace-reference
An entry also accepts every [`plugin.json` field](/docs/en/plugins/manifest-reference), such as `description`, `version`, `author`, `commands`, and `hooks`. For when those fields a
Apart from the [directory listing fields](/docs/en/plugins/manifest-reference#directory-listing-fields), an entry also accepts every [`plugin.json` field](/docs/en/plugins/manifest
* **No `plugin.json`**: the entry is the manifest regardless of `strict`. Every manifest field in the entry applies, including [`mcpServers`, `lspServers`, `userConfig`, and `chann
* **No `plugin.json`**: the entry is the manifest regardless of `strict`. Every manifest field that the entry accepts applies, including [`mcpServers`, `lspServers`, `userConfig`,
+2 −2 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
plugins/manifest-reference
±changed
+14−1
claude-codechanged
plugins/manifest-reference
| [`icon`](#directory-listing-fields) | String | Icon for the plugin's listing in Anthropic's directory. Claude Code doesn't read it |
| [`documentationUrl`](#directory-listing-fields) | String | Documentation link for the plugin's listing in Anthropic's directory. Claude Code doesn't read it |
| [`supportUrl`](#directory-listing-fields) | String | Support link for the plugin's listing in Anthropic's directory. Claude Code doesn't read it |
| [`privacyPolicyUrl`](#directory-listing-fields) | String | Privacy policy link for the plugin's listing in Anthropic's directory. Claude Code doesn't read it |
| [`termsOfServiceUrl`](#directory-listing-fields) | String | Terms of service link for the plugin's listing in Anthropic's directory. Claude Code doesn't read it |
+14 −1 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
plugins/create-marketplace
±changed
+1−3
claude-codechanged
plugins/create-marketplace
For the full field list, see [Plugin entries](/docs/en/plugins/marketplace-reference#plugin-entries).
An entry can also set any [`plugin.json`](/docs/en/plugins/manifest-reference) field. For when an entry's `plugin.json` fields apply to a plugin that has its own `plugin.json`, see
For the full field list, see [Plugin entries](/docs/en/plugins/marketplace-reference#plugin-entries), which also covers the [`plugin.json`](/docs/en/plugins/manifest-reference) fie
+1 −3 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
permissions
±changed
+1−1
claude-codechanged
permissions
To block Claude's file tools from reading a file or directory, add a `Read` deny rule for its path, such as `Read(./.env)` or `Read(./secrets/**)`; [Exclude sensitive files](/docs/
To block Claude's file tools from reading a file or directory, add a `Read` deny rule for its path, such as `Read(./.env)` or `Read(./secrets/**)`; [Exclude sensitive files](/docs/
+1 −1 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
plugins/components
±changed
+1−2
claude-codechanged
plugins/components
required: "Required by Anthropic's directory",
The [manifest](/docs/en/plugins/manifest-reference) is the `plugin.json` file in a plugin's `.claude-plugin/` directory. It contains the plugin's metadata and the `userConfig`
The [manifest](/docs/en/plugins/manifest-reference) is the `plugin.json` file in a plugin's `.claude-plugin/` directory. It contains the plugin's metadata and the `userConfig`
+1 −2 lines
Upstream edited 1 Oct 2026 23:38 UTC Recorded here 2 Oct 2026 00:07 UTC
claude-code
claude-tag
±changed
+1−1
claude-codechanged
claude-tag
No line of the body moved in this read.
+1 −1 lines
Recorded here 1 Oct 2026 23:37 UTC
claude-code
agent-sdk/typescript
±changed
+1−1
claude-codechanged
agent-sdk/typescript
* **The turn's first reply**: the first [assistant message](#sdkassistantmessage), or with `includePartialMessages` the first [stream event](#sdkpartialassistantmessage) whose `eve
* **The turn's first reply**: the first [assistant message](#sdkassistantmessage), and with `includePartialMessages` also the first [stream event](#sdkpartialassistantmessage) whos
+1 −1 lines
Upstream edited 1 Oct 2026 23:32 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
agent-sdk/hooks
±changed
+1−1
claude-codechanged
agent-sdk/hooks
* For `PreToolUse` hooks, this is where you set `permissionDecision` (`"allow"`, `"deny"`, `"ask"`, or `"defer"`), `permissionDecisionReason`, and `updatedInput`. If you return `
* For `PreToolUse` hooks, this is where you set `permissionDecision` (`"allow"`, `"deny"`, `"ask"`, or `"defer"`), `permissionDecisionReason`, and `updatedInput`. If you return `
+1 −1 lines
Upstream edited 1 Oct 2026 23:31 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
agent-view
±changed
+26−6
claude-codechanged
agent-view
Type a reply in the peek panel and press `Enter` to send it to that session. When the session asks a question with predefined choices, the peek panel shows them as a numbered list
Type a reply in the peek panel and press `Enter` to send it to that session. Prefix a reply with `!` to send a Bash command instead. What happens to the reply depends on the sessio
* A session that's working: the reply joins the session's [message queue](/docs/en/interactive-mode#queue-messages-while-claude-works) instead of interrupting the response, and tak
* A reply that is exactly `/stop`: stops the session at once instead of being delivered to it, whether the session is working or waiting on you
+26 −6 lines
Upstream edited 1 Oct 2026 23:30 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
remote-control
±changed
+17−1
claude-codechanged
remote-control
* **Attachments that don't download**: if a file you attach from your phone or browser can't be downloaded to your machine, Claude still receives your message and the files that we
### "Remote Control is disabled by your organization's policy"
<h3 id="remote-control-is-disabled-by-your-organizations-policy">
"Remote Control is disabled by your organization's policy"
</h3>
+17 −1 lines
Upstream edited 1 Oct 2026 23:29 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
managed-settings
±changed
+3−1
claude-codechanged
managed-settings
On Team and Enterprise plans, an Owner enables or disables [Remote Control](/docs/en/remote-control) and [cloud sessions](/docs/en/claude-code-on-the-web) organization-wide in [C
On Team and Enterprise plans, an Owner enables or disables [Remote Control](/docs/en/remote-control) and [cloud sessions](/docs/en/claude-code-on-the-web) organization-wide in [C
Remote Control can additionally be disabled per device with the [`disableRemoteControl`](/docs/en/settings-reference#disableremotecontrol) setting. Cloud sessions have no per-dev
+3 −1 lines
Upstream edited 1 Oct 2026 23:29 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
errors
±changed
+2−0
claude-codechanged
errors
| `Remote Control is disabled by your organization's policy` | [Troubleshoot Remote Control](/docs/en/remote-control#remote-control-is-disabled-by-your-organizations-policy) |
| `Remote Control was turned off by your organization's policy` | [Troubleshoot Remote Control](/docs/en/remote-control#remote-control-was-turned-off-by-your-organizations-policy)
+2 −0 lines
Upstream edited 1 Oct 2026 23:29 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
sub-agents
±changed
+6−1
claude-codechanged
sub-agents
With a fork's or subagent's transcript open, follow-up messages and [skills](/docs/en/skills) go to that agent, but built-in commands still run in your main conversation. As of v2.
With a fork's or subagent's transcript open, follow-up messages and [skills](/docs/en/skills) go to that agent, and built-in commands go to your main conversation, with these safeg
* `/compact`, `/clear`, and `/rewind` act on the main conversation, so Claude Code asks you to confirm before running one of them from this view.
* `/model` and `/fast` set the main conversation's model and fast mode, not the viewed agent's, so they don't run from this view. A notice tells you why.
+6 −1 lines
Upstream edited 1 Oct 2026 23:27 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
fullscreen
±changed
+2−0
claude-codechanged
fullscreen
* Where the bar has `↑` and `↓` arrows at its ends, click an arrow to scroll a single row, or hold it to keep scrolling. The arrows require Claude Code v2.1.286 or later.
* **Click the `↑ N more` or `↓ N more` row at the edge of a list** to jump to that end of the list without choosing an option. Requires Claude Code v2.1.286 or later.
+2 −0 lines
Upstream edited 1 Oct 2026 23:27 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
agent-teams
±changed
+6−3
claude-codechanged
agent-teams
While you're viewing an in-process teammate, plain text and [skills](/docs/en/skills) go to that teammate, but built-in commands still run in the lead's session.
A teammate's model and fast mode are fixed when it spawns, so `/model` and `/fast` only change the lead's settings. As of v2.1.199, typing either command while viewing a teammate s
While you're viewing an in-process teammate, plain text and [skills](/docs/en/skills) go to that teammate, and built-in commands go to the lead's session, with these safeguards:
+6 −3 lines
Upstream edited 1 Oct 2026 23:27 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
tools-reference
±changed
+1−1
claude-codechanged
tools-reference
Setting [`CLAUDE_CODE_DISABLE_BACKGROUND_TASKS=1`](/docs/en/env-vars#variables) disables auto-backgrounding along with the rest of the background task functionality.
Setting [`CLAUDE_CODE_DISABLE_BACKGROUND_TASKS=1`](/docs/en/env-vars#variables) or running in [bare mode](/docs/en/headless#start-faster-with-bare-mode) disables auto-backgrounding
+1 −1 lines
Upstream edited 1 Oct 2026 23:26 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
headless
±changed
+8−0
claude-codechanged
headless
Bare mode also limits what happens while the session runs:
* **MCP servers**: only servers supplied on the command line connect, for example with `--mcp-config`. In an interactive session, Claude Code also skips the automatic IDE connectio
* **System reminders**: Claude gets your prompts and the tool results without the [system reminders](/docs/en/glossary#system-reminder) Claude Code would add alongside them. For ex
+8 −0 lines
Upstream edited 1 Oct 2026 23:26 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
skills
±changed
+8−0
claude-codechanged
skills
### Run your checks before each commit
When a session starts with a skill named `verify` or `simplify` in place, Claude Code's commit instructions tell Claude to run it right before each commit, except for changes to do
+8 −0 lines
Upstream edited 1 Oct 2026 23:26 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
ultrareview
±changed
+6−6
claude-codechanged
ultrareview
A review typically takes 5 to 10 minutes. The review runs as a background task, so you can keep working in your session, start other commands, or close the terminal entirely. If yo
A review typically takes 5 to 10 minutes. The review runs as a background task, so you can keep working in your session or start other commands. If you chose to [post the findings
On Claude Code v2.1.218 or later, you can also start the cloud review by running `/code-review ultra` in a non-interactive session, for example `claude -p '/code-review ultra'`. Cl
Progress messages and the live session URL go to stderr so stdout stays parseable. Use these flags to control the output, the timeout, and whether to post the findings:
+6 −6 lines
Upstream edited 1 Oct 2026 23:24 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
code-review
±changed
+1−3
claude-codechanged
code-review
To start a cloud review from a script or CI, run `claude -p '/code-review ultra'`. Claude Code launches the review and prints a link for tracking it. Requires Claude Code v2.1.218
When the review would bill [usage credits](https://support.claude.com/en/articles/12429409-extra-usage-for-paid-claude-plans), Claude Code stops before launching, because the billi
To run a cloud review from a script or CI job, use the [`claude ultrareview` subcommand](/docs/en/ultrareview#run-ultrareview-non-interactively), which waits for the findings and p
+1 −3 lines
Upstream edited 1 Oct 2026 23:24 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
security
±changed
+14−18
claude-codechanged
security
In Manual mode, Claude Code starts with read-only permissions. When Claude Code needs to edit files, run tests, or execute commands, it asks you first, and you choose whether to ap
A session's permission mode sets which actions Claude can take without asking you first. Auto mode is the built-in starting permission mode for interactive terminal and VS Code ses
In Manual mode, Claude Code also asks before running Bash commands that can modify your system. It runs a built-in set of [read-only commands](/docs/en/permissions#read-only-comman
* **Auto mode**: A separate classifier model reviews actions instead of you and blocks the ones it judges unsafe. [How the classifier evaluates actions](/docs/en/permission-modes#h
* **Manual mode**: Claude Code starts with read-only permissions. When it needs to edit files, run tests, or execute commands, it asks you first, and you choose whether to approve
+14 −18 lines
Upstream edited 1 Oct 2026 23:14 UTC Recorded here 1 Oct 2026 23:37 UTC
claude-code
claude-tag
±changed
+2−2
claude-codechanged
claude-tag
No line of the body moved in this read.
+2 −2 lines
Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/mods/reference
±changed
+1−1
claude-codechanged
plugins/mods/reference
Elements are the building blocks of a tree a `ui.render` hook returns, and you get them from `$.ui.resolve(e)`. [Build a tree from elements](/docs/en/plugins/mods/interface#build-a
Elements are the building blocks of a tree a `ui.render` hook returns, and you get them from `$.ui.resolve(e)`. [Build a tree from elements](/docs/en/plugins/mods/interface#build-a
+1 −1 lines
Upstream edited 1 Oct 2026 23:04 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/mods/interface
±changed
+2−2
claude-codechanged
plugins/mods/interface
Note: Type a note and press Enter ⏎ add
Note: Type a note and press Enter
This table lists every element:
The [interface gallery](/docs/en/plugins/mods/gallery) has samples and screenshots of most elements. This table lists every element:
+2 −2 lines
Upstream edited 1 Oct 2026 23:04 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/mods/gallery
+new page
+389−0
claude-codenew page
plugins/mods/gallery
No line of the body moved in this read.
+389 −0 lines
Upstream edited 1 Oct 2026 23:04 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
agent-sdk/typescript
±changed
+2−2
claude-codechanged
agent-sdk/typescript
The `context-1m-2025-08-07` beta is retired as of April 30, 2026. Passing this value with Claude Sonnet 4.5 or Sonnet 4 has no effect, and requests that exceed the standard 200k-
On the Claude API, the `context-1m-2025-08-07` beta is retired for Claude Sonnet 4.5 and Claude Sonnet 4. If you still pass it with either model, requests that exceed the standar
| `resolvedModel` | `string \| undefined` | Canonical wire model ID that this entry's `value` resolves to. An alias entry such as `sonnet` resolves to an explicit model ID such as
| `resolvedModel` | `string \| undefined` | The model ID that this entry's `value` resolves to, such as `claude-sonnet-5-5` for the `sonnet` alias entry. Requires Claude Code v2.1.
+2 −2 lines
Upstream edited 1 Oct 2026 23:04 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
agent-sdk/python
±changed
+1−1
claude-codechanged
agent-sdk/python
The `context-1m-2025-08-07` beta is retired as of April 30, 2026. Passing this header with Claude Sonnet 4.5 or Sonnet 4 has no effect, and requests that exceed the standard 200k
On the Claude API, the `context-1m-2025-08-07` beta is retired for Claude Sonnet 4.5 and Claude Sonnet 4. If you still pass it with either model, requests that exceed the standar
+1 −1 lines
Upstream edited 1 Oct 2026 23:04 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
settings-reference
±changed
+11−0
claude-codechanged
settings-reference
The key also stops [mods](/docs/en/plugins/mods/overview), which are plugins whose code registers hooks:
* **In managed settings**: the mods in every installed plugin stop, your organization's included
* **In any other settings file**: the mods you installed stop, and [your organization's mods](/docs/en/plugins/mods/admin#install-your-organizations-mods) keep running
+11 −0 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
sandboxing
±changed
+1−0
claude-codechanged
sandboxing
* **Mods**: a [mod](/docs/en/plugins/mods/overview) is a plugin that runs its own code inside Claude Code, and a process that a mod starts runs outside the sandbox. See [What a mod
+1 −0 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/security
±changed
+1−1
claude-codechanged
plugins/security
* **Hooks and server processes**: command hooks execute shell commands with your full user permissions. Claude Code runs hooks and MCP servers outside the sandbox.
* **Hooks and server processes**: command hooks execute shell commands with your full user permissions. Claude Code runs hooks, MCP servers, and the processes a [mod](/docs/en/plug
+1 −1 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/mods/overview
±changed
+2−0
claude-codechanged
plugins/mods/overview
Mods aren't sandboxed. If you turn on [sandboxing](/docs/en/sandboxing), the sandbox isolates the Bash commands Claude runs, and a process that a mod starts runs outside it.
+2 −0 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/mods/events
±changed
+26−1
claude-codechanged
plugins/mods/events
#### Approve or refuse a tool call before the user is asked
To decide whether a tool call may run, handle [`tool.check`](/docs/en/plugins/mods/reference#tools), the event where Claude Code makes that decision. It fires after the permission
For a fixed command or path, use a [permission rule](/docs/en/permissions#permission-rule-syntax) such as `Bash(npm test)`, which takes no code. Handle `tool.check` when the decisi
+26 −1 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/mods/admin
±changed
+47−0
claude-codechanged
plugins/mods/admin
### Allow only your organization's mods
To run your organization's mods and block the ones users bring, deploy the settings from the **Only your organization's mods** row of the [policy table](#choose-how-much-to-allow),
```json managed-settings.json theme={null}
+47 −0 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/cli-reference
±changed
+17−1
claude-codechanged
plugins/cli-reference
### plugin test
Run the tests for a [mod](/docs/en/plugins/mods/overview), a plugin whose code registers event handlers. The command needs no session, sign-in, or network. For how to write a test,
```bash theme={null}
+17 −1 lines
Upstream edited 1 Oct 2026 22:58 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
sandbox-environments
±changed
+3−1
claude-codechanged
sandbox-environments
* `/tmp`, where Claude Code writes runtime files.
* The directory where Claude Code writes runtime files. Unless you set [`CLAUDE_CODE_TMPDIR`](/docs/en/env-vars), that directory is:
* **Linux and WSL2**: `/tmp`
* **macOS**: `/private/tmp`. `/tmp` is a symlink to that directory, and Seatbelt checks the resolved path.
+3 −1 lines
Upstream edited 1 Oct 2026 22:50 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/troubleshooting
±changed
+15−0
claude-codechanged
plugins/troubleshooting
<h3 id="an-npm-plugin-source-must-name-a-registry-package">
`An npm plugin source must name a registry package`
</h3>
+15 −0 lines
Upstream edited 1 Oct 2026 22:47 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/marketplace-reference
±changed
+11−3
claude-codechanged
plugins/marketplace-reference
| `npm` | `package`, `version`, `registry` | npm package, fetched with your npm client and unpacked without running install scripts |
| `npm` | `package`, `version`, `registry` | npm registry package or tarball link, fetched with your npm client and unpacked without running install scripts |
* `package`: a package name, or a scoped name such as `@your-org/formatter`
* `version`: a version or range
* `package`: a registry package name such as `@your-org/formatter`, a name with a version appended such as `@your-org/[email protected]`, or an `https` link to the package's tarball
+11 −3 lines
Upstream edited 1 Oct 2026 22:47 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
plugins/loading
±changed
+26−20
claude-codechanged
plugins/loading
Claude Code runs the install inside the copied version directory each time it creates one:
Claude Code installs the dependencies into the copied version directory each time it creates one:
The install runs only when the plugin's root directory contains both a `package.json` and a supported lockfile. The lockfile decides which command Claude Code runs:
| Lockfile | Command |
+26 −20 lines
Upstream edited 1 Oct 2026 22:47 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
errors
±changed
+9−1
claude-codechanged
errors
| `An npm plugin source must name a registry package` | [Plugin troubleshooting](/docs/en/plugins/troubleshooting#an-npm-plugin-source-must-name-a-registry-package) |
* `The response stream was malformed`: an event arrived for a content block that had already finished, or an event arrived damaged. A damaged event is one whose data isn't valid JS
* `The response stream was malformed`: an event arrived for a content block that had already finished, or an event arrived damaged. A damaged event is one whose data isn't valid JS
If you sign in with your claude.ai account in another Claude Code window that uses the same [configuration directory](/docs/en/claude-directory), an interactive session showing thi
+9 −1 lines
Upstream edited 1 Oct 2026 22:47 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
troubleshoot-install
±changed
+3−1
claude-codechanged
troubleshoot-install
Parallel sessions on one machine share a saved login and coordinate its renewal so that only one process refreshes the token at a time. Before v2.1.211, waking the machine from sle
Parallel sessions on one machine share a saved login and coordinate its renewal so that only one process refreshes the token at a time. For what the other sessions do after you sig
Before v2.1.211, waking the machine from sleep could cause two sessions to renew with the same token, which revoked the saved login and prompted every open session to log in again
+3 −1 lines
Upstream edited 1 Oct 2026 22:44 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
agent-sdk/streaming-vs-single-mode
±changed
+2−2
claude-codechanged
agent-sdk/streaming-vs-single-mode
When you run the example, the TypeScript version prints each response as it completes. The Python version's `receive_response()` loop ends at the first result message, so it prints
When you run the example, the TypeScript version prints each response as it completes. The Python version's `receive_response()` loop ends at the first result message, so it prints
If a query ends with an error result, such as `error_max_turns`, a single message `query()` call raises an error that includes the failure text after yielding the final result mess
If a query ends with an error result, such as `error_max_turns`, a single message `query()` call raises an error that includes the failure text after yielding the final result mess
+2 −2 lines
Upstream edited 1 Oct 2026 22:40 UTC Recorded here 22 Oct 2026 18:07 UTC
claude-code
agent-sdk/streaming-vs-single-mode
±changed
+219−223
claude-codechanged
agent-sdk/streaming-vs-single-mode
<CodeGroup>
```typescript TypeScript theme={null}
import { query, type SDKUserMessage } from "@anthropic-ai/claude-agent-sdk";
import { readFile } from "fs/promises";
+219 −223 lines
Upstream edited 1 Oct 2026 22:40 UTC Recorded here 20 Oct 2026 18:37 UTC
claude-code
agent-sdk/streaming-vs-single-mode
±changed
+2−0
claude-codechanged
agent-sdk/streaming-vs-single-mode
If an image block's `source` is missing or isn't an object, the SDK doesn't report an error. Claude Code sends Claude a text note in place of the image, such as `[Image could not b
+2 −0 lines
Upstream edited 1 Oct 2026 22:40 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
llm-gateway-protocol
±changed
+1−1
claude-codechanged
llm-gateway-protocol
Deliver each response's full event sequence without dropping, duplicating, or reordering events. When an event references a content block whose `content_block_start` never arrived,
Deliver each response's full event sequence without dropping, duplicating, or reordering events. When an Amazon Bedrock guardrail blocks a reply, forward the events it sends unchan
+1 −1 lines
Upstream edited 1 Oct 2026 22:40 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
amazon-bedrock
±changed
+2−0
claude-codechanged
amazon-bedrock
When the guardrail blocks a response partway through, the text streamed so far stays and the reply ends with the message configured on the guardrail for blocked responses.
+2 −0 lines
Upstream edited 1 Oct 2026 22:40 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
accessibility
±changed
+9−5
claude-codechanged
accessibility
| [`CLAUDE_AX_PREPARK_MS`](/docs/en/env-vars#variables) | Environment variable | How long Claude Code waits, with the cursor at the start of the line, before it writes a new or cha
| [`CLAUDE_AX_PREPARK_MS`](/docs/en/env-vars#variables) | Environment variable | When you set it, how many milliseconds Claude Code holds the terminal cursor at the start of the cu
* Diffs read as plain text, line by line with `+` and `-` marking added and removed lines, so you can hear the proposed change in a file edit approval prompt before you answer it
Claude Code also waits at two points so your screen reader can keep up:
+9 −5 lines
Upstream edited 1 Oct 2026 22:37 UTC Recorded here 1 Oct 2026 23:07 UTC
claude-code
claude-tag
±changed
+3−3
claude-codechanged
claude-tag
No line of the body moved in this read.
+3 −3 lines
Recorded here 1 Oct 2026 22:37 UTC
claude-code
worktrees
±changed
+2−0
claude-codechanged
worktrees
A subagent in its own worktree takes the instruction files it [starts with](/docs/en/sub-agents#what-loads-at-startup) from your main conversation, not from its worktree. When that
+2 −0 lines
Upstream edited 1 Oct 2026 22:26 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
memory
±changed
+2−2
claude-codechanged
memory
Claude also discovers `CLAUDE.md` and `CLAUDE.local.md` files in subdirectories under your current working directory. Instead of loading them at launch, they are included when Clau
Claude also discovers `CLAUDE.md` and `CLAUDE.local.md` files in subdirectories under your current working directory. Instead of loading them at launch, they are included when Clau
Rules without a `paths` field are loaded unconditionally and apply to all files. Path-scoped rules trigger when Claude reads files matching the pattern, not on every tool use. As o
Rules without a `paths` field are loaded unconditionally and apply to all files. Path-scoped rules trigger when Claude reads files matching the pattern, not on every tool use. Matc
+2 −2 lines
Upstream edited 1 Oct 2026 22:26 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
remote-control
±changed
+1−1
claude-codechanged
remote-control
To bring back a session you started with `claude --remote-control` or `/remote-control`, resume the conversation with `claude --continue` or `claude --resume`. If Remote Control do
To bring back a session you started with `claude --remote-control` or `/remote-control`, resume the conversation with `claude --continue` or `claude --resume`. For the permission m
+1 −1 lines
Upstream edited 1 Oct 2026 22:25 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
hooks
±changed
+6−12
claude-codechanged
hooks
Type `/hooks` in Claude Code to open a read-only browser for your configured hooks. The menu shows every hook event with a count of configured hooks, lets you drill into matchers,
The menu displays all five hook types: `command`, `prompt`, `agent`, `http`, and `mcp_tool`. Each hook is labeled with a `[type]` prefix and a source indicating where it was define
* `User Settings`: from `~/.claude/settings.json`
+6 −12 lines
Upstream edited 1 Oct 2026 22:23 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
hooks-guide
±changed
+12−9
claude-codechanged
hooks-guide
Type `/hooks` to open the hooks browser. You'll see a list of all available hook events, with a count next to each event that has hooks configured. Select `Notification` to con
Type `/hooks` at the Claude Code prompt to open the hooks browser. Your new hook appears in the list under `Notification`.
<Tip>
The `/hooks` menu is read-only. To add, modify, or remove hooks, edit your settings JSON directly or ask Claude to make the change.
</Tip>
+12 −9 lines
Upstream edited 1 Oct 2026 22:23 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
plugins/mods/troubleshoot
±changed
+2−0
claude-codechanged
plugins/mods/troubleshoot
Some settings stop a mod and leave the rest of its plugin working. [Turn mods on or off](/docs/en/plugins/mods/overview#turn-mods-on-or-off) names them.
+2 −0 lines
Upstream edited 1 Oct 2026 22:17 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
plugins/mods/overview
±changed
+2−0
claude-codechanged
plugins/mods/overview
`disableAllHooks` and your organization's `allowManagedModsOnly` stop a mod and leave the rest of its plugin in place: the plugin stays installed, and its skills, commands, agents,
+2 −0 lines
Upstream edited 1 Oct 2026 22:17 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
troubleshoot-install
±changed
+13−1
claude-codechanged
troubleshoot-install
| `EACCES: permission denied` during install | [Fix the install directory's permissions](#permission-errors-during-installation) |
The installer needs write access to `~/.local/bin/` and `~/.claude/` on macOS and Linux. On Windows the install location is under `%USERPROFILE%`, which is writable by your user by
An install that fails on permissions names the path it couldn't create or write. On Windows the install writes under `%USERPROFILE%`, which is writable by your user by default, so
On macOS and Linux the install writes to these locations:
+13 −1 lines
Upstream edited 1 Oct 2026 22:08 UTC Recorded here 1 Oct 2026 22:37 UTC
claude-code
claude-tag
±changed
+1−1
claude-codechanged
claude-tag
No line of the body moved in this read.
+1 −1 lines
Recorded here 1 Oct 2026 22:07 UTC
claude-code
troubleshooting
±changed
+5−0
claude-codechanged
troubleshooting
If the error comes back after a `/clear`, run [`/context`](/docs/en/debug-your-config) and compare the `Messages` row with the rows above it:
* **`Messages` is the largest row**: a file or tool output in the new conversation is refilling the window, so work through steps 1 to 3 again
* **The other rows together are larger**: what loads at session start leaves too little room to work in, so [trim what loads at startup](/docs/en/errors#prompt-is-too-long)
+5 −0 lines
Upstream edited 1 Oct 2026 22:04 UTC Recorded here 1 Oct 2026 22:07 UTC
claude-code
self-hosted-environments-configuration
±changed
+15−0
claude-codechanged
self-hosted-environments-configuration
### Pass the system prompt flags through
The system prompt and appended system prompt that Anthropic's control plane sends for a session reach your wrapper as file paths, not as inline text. The runner writes each prompt
+15 −0 lines
Upstream edited 1 Oct 2026 22:01 UTC Recorded here 1 Oct 2026 22:07 UTC
claude-code
memory
±changed
+3−1
claude-codechanged
memory
Auto memory is on by default. To toggle it, open `/memory` in a session and use the auto memory toggle, which saves `autoMemoryEnabled` to your user settings at `~/.claude/settings
Auto memory is on by default in local sessions. Outside [Claude Tag](https://claude.com/docs/claude-tag/overview) sessions, a session in a [self-hosted environment](/docs/en/self-h
To toggle it, open `/memory` in a session and use the auto memory toggle, which saves `autoMemoryEnabled` to your user settings at `~/.claude/settings.json`. To turn it off for a s
+3 −1 lines
Upstream edited 1 Oct 2026 22:01 UTC Recorded here 1 Oct 2026 22:07 UTC
claude-code
errors
±changed
+17−0
claude-codechanged
errors
| `Error: Cannot use both --append-subagent-system-prompt and --append-subagent-system-prompt-file. Please use only one.` | [Command-line errors](#conflict-between-a-system-prompt-
<h3 id="conflict-between-a-system-prompt-flag-and-its-file-form">
Conflict between a system prompt flag and its file form
</h3>
+17 −0 lines
Upstream edited 1 Oct 2026 21:58 UTC Recorded here 1 Oct 2026 22:07 UTC
claude-code
settings-reference
±changed
+3−2
claude-codechanged
settings-reference
For example, `cd build && docker compose up` stays sandboxed under a `docker *` entry, and adding a `cd` entry doesn't change that.
* A `git clone`, `git init`, `git worktree add`, `git worktree move`, or `git bundle create` with a path argument that is absolute, starts with `~`, or contains a `..` segment
For example, `cd build && docker compose up` stays sandboxed under a `docker *` entry, and adding a `cd` entry doesn't change that. Under a `git *` entry, `git clone <url> vendor/l
+3 −2 lines
Upstream edited 1 Oct 2026 21:55 UTC Recorded here 1 Oct 2026 22:07 UTC
claude-code
agent-sdk/typescript
±changed
+1−1
claude-codechanged
agent-sdk/typescript
For the `Agent` tool, `tool_use_result` is [`AgentOutput`](#agent-2). On a `completed` result, `content` holds the subagent's report without the agent ID and usage trailer that Cla
For the `Agent` tool, `tool_use_result` is [`AgentOutput`](#agent-2). Render from it rather than parsing the `tool_result` text. A `completed` result's `content` holds the subagent
+1 −1 lines
Upstream edited 1 Oct 2026 21:55 UTC Recorded here 1 Oct 2026 22:07 UTC
claude-code
agent-sdk/subagents
±changed
+1−1
claude-codechanged
agent-sdk/subagents
The parent receives the subagent's final message as the Agent tool result, but may summarize it in its own response. To preserve subagent output verbatim in the user-facing respo
The parent receives the subagent's final report, but may summarize it in its own response. To preserve subagent output verbatim in the user-facing response, include an instructio
+1 −1 lines
Upstream edited 1 Oct 2026 21:55 UTC Recorded here 1 Oct 2026 22:07 UTC
Nothing on this page matches that. Press Enter to search every page of the ledger.