HomeDocs changes
Documentation changes
What the docs quietly changed.
Anthropic's published documentation, fetched on a schedule and diffed against the last copy. Every edit dated, including the ones that never made a release note.
Last poll read all 4 cleanly: Claude Code CLI, Claude Developer Platform, Claude Documentation, Model Context Protocol. A date here is when this site noticed, not when Anthropic edited.
Claude Developer Platform
821pages tracked
767 changed this week · last read 24 Oct 2026
Claude Code CLI
228pages tracked
146 changed this week · last read 24 Oct 2026
Claude Documentation
280pages tracked
69 changed this week · last read 24 Oct 2026
Model Context Protocol
357pages tracked
171 changed this week · last read 24 Oct 2026
100 on this page
ReadSourcePageWhatLines
2 Oct 2026
162 pages
+6373 −2493 lines
claude-code
goal
±changed
+2−2
claude-codechanged
goal
The `/goal` command sets a completion condition and Claude keeps working toward it without you prompting each step. After each turn, a small fast model checks whether the condition
The `/goal` command sets a completion condition and Claude keeps working toward it without you prompting each step. After each turn, a model checks whether the condition holds. If
`/goal` is a wrapper around a session-scoped [prompt-based Stop hook](/docs/en/hooks#prompt-based-hooks). Each time Claude finishes a turn, Claude Code sends the condition and the
`/goal` is a wrapper around a session-scoped [prompt-based Stop hook](/docs/en/hooks#prompt-based-hooks). Each time Claude finishes a turn, Claude Code sends the condition and the
+2 −2 lines
Upstream edited 2 Oct 2026 13:59 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
plugins/troubleshooting
±changed
+16−0
claude-codechanged
plugins/troubleshooting
<h3 id="the-packages-it-lists-are-not-installed">
`The packages it lists are not installed` or `were not installed, because ...`
</h3>
+16 −0 lines
Upstream edited 2 Oct 2026 13:58 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
plugins/loading
±changed
+6−7
claude-codechanged
plugins/loading
A failed or skipped install never blocks the plugin, which then loads without the dependencies. Each case leaves a different sign:
* A failed install, or one skipped because of its lockfile or one of the [limits on the install](#limits-on-the-dependency-install), appears in the `claude --debug` output as a `Pl
* A plugin with a `package.json` and no lockfile is skipped without a log entry
If the install fails or is skipped, the plugin still loads, but the parts of it that need the missing packages may not work.
+6 −7 lines
Upstream edited 2 Oct 2026 13:58 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
errors
±changed
+75−0
claude-codechanged
errors
| `is less capable than the current main model` / `Advisor will not activate on the main model` / `cannot advise` | [Request errors](#advisor-is-less-capable-than-the-current-main-
| `Claude Code can't read the keyboard here: stdin is not a terminal` | [Command-line errors](#claude-code-cant-read-the-keyboard-here) |
| `The packages it lists are not installed` / `The packages it lists were not installed, because` | [Plugin troubleshooting](/docs/en/plugins/troubleshooting#the-packages-it-lists-
| `Not published: that file is on a network share` | [Tool errors](#not-published-that-file-is-on-a-network-share) |
### Advisor is less capable than the current main model
+75 −0 lines
Upstream edited 2 Oct 2026 13:58 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
artifacts
±changed
+1−0
claude-codechanged
artifacts
| Source location | A file at a path that names a network host is refused without being read. See [Not published: that file is on a network share](/docs/en/errors#not-published-tha
+1 −0 lines
Upstream edited 2 Oct 2026 13:58 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
advisor
±changed
+21−19
claude-codechanged
advisor
If the requested model can act as an advisor but [ranks below](#choose-an-advisor-model) the session's main model, Claude Code starts the session anyway. Outside background session
Both Claude Code and the API require an advisor at least as capable as the main model, and the two rank some models differently. The accepted advisors for each main model are:
| Main model | Accepted advisors | Notes |
+21 −19 lines
Upstream edited 2 Oct 2026 13:58 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
interactive-mode
±changed
+28−27
claude-codechanged
interactive-mode
If you queue a message with a selection attached from a [connected IDE](/docs/en/vs-code#the-built-in-ide-mcp-server) or the [diff panel](#diff-panel), it keeps the selection you h
If you queue a message with a selection attached from a [connected IDE](/docs/en/vs-code#the-built-in-ide-mcp-server), it keeps the selection you had when you pressed `Enter`, what
When you pass a prompt on the command line, as in `claude "fix the login bug"`, or pipe one into an interactive session, Claude Code doesn't wait for a second Enter. It removes the
When you pass a prompt on the command line, as in `claude "fix the login bug"`, Claude Code doesn't wait for a second Enter. It removes the characters, shows a notice, and sends th
Run `/diff` to look over the changes in your working tree without leaving Claude Code. You see the edits Claude has made so far alongside anything else you haven't committed.
+28 −27 lines
Upstream edited 2 Oct 2026 13:55 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
best-practices
±changed
+1−1
claude-codechanged
best-practices
* **Pipe in data** by running `cat error.log | claude` to send file contents directly.
* **Pipe in data** by running `cat error.log | claude -p "explain this error"` to send file contents directly.
+1 −1 lines
Upstream edited 2 Oct 2026 13:55 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
keybindings
±changed
+10−6
claude-codechanged
keybindings
| `DiffDialog` | Diff viewer navigation |
| `DiffDialog` | [Diff viewer](#diff-actions) navigation |
These actions reach only Claude Code's earlier diff viewer, which `/diff` opens outside [fullscreen rendering](/docs/en/fullscreen) after you disable the [`cc-plugin-diff` mod](/do
Actions for the [diff panel](/docs/en/interactive-mode#diff-panel) that `/diff` opens in fullscreen rendering. `app:cycleDiffBase` is in the `DiffPanel` context, which is active wh
+10 −6 lines
Upstream edited 2 Oct 2026 13:37 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
fullscreen
±changed
+1−1
claude-codechanged
fullscreen
In fullscreen rendering, [`/diff`](/docs/en/interactive-mode#review-changes-with-%2Fdiff) opens a panel beside the conversation rather than a viewer you have to close, so you can w
In fullscreen rendering, [`/diff`](/docs/en/interactive-mode#review-changes-with-%2Fdiff) opens a panel beside the conversation, so you can watch the changes accumulate while Claud
+1 −1 lines
Upstream edited 2 Oct 2026 13:37 UTC Recorded here 2 Oct 2026 14:07 UTC
claude-code
claude-tag
±changed
+2−2
claude-codechanged
claude-tag
No line of the body moved in this read.
+2 −2 lines
Recorded here 2 Oct 2026 13:37 UTC
claude-code
errors
±changed
+93−2
claude-codechanged
errors
| `Your GitHub organization has an IP allowlist that is blocking Claude` | [Command-line errors](#a-github-organization-policy-is-blocking-claude) |
| `Your GitHub organization requires single sign-on` | [Command-line errors](#a-github-organization-policy-is-blocking-claude) |
| `Your GitHub organization's identity provider (Microsoft Entra ID) has a Conditional Access policy that is blocking Claude` | [Command-line errors](#a-github-organization-policy-
| `/recap only runs when you ask for it yourself in this session` | [Command-line errors](#recap-only-runs-when-you-ask-for-it-yourself) |
| `Error: No such tool available: <tool name>` | [Tool errors](#no-such-tool-available) |
+93 −2 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
claude-apps-gateway-config
±changed
+39−1
claude-codechanged
claude-apps-gateway-config
* The model list, from `availableModels`
* The model list, from `availableModels`. [Extended context in Claude Desktop](#extended-context-in-claude-desktop) covers each model's 1M context option
#### Extended context in Claude Desktop
+39 −1 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
monitoring-usage
±changed
+1−1
claude-codechanged
monitoring-usage
* A WebFetch or WebSearch call that Claude Code moved to the background because you interrupted the turn to [send your queued messages right away](/docs/en/interactive-mode#when-cl
* A WebFetch or WebSearch call that Claude Code moved to the background while it ran so that a waiting message could reach Claude. The result that arrives later isn't recorded eith
+1 −1 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
agent-sdk/typescript
±changed
+44−11
claude-codechanged
agent-sdk/typescript
| `toggleMcpServer(serverName, enabled)` | Enable or disable an MCP server by name, with the same name resolution as `reconnectMcpServer()`. Disabling a stdio, SSE, or HTTP server
| `toggleMcpServer(serverName, enabled)` | Enable or disable an MCP server by name, with the same name resolution as `reconnectMcpServer()`. Disabling a server disconnects it and r
#### `toggleMcpServer()`
+44 −11 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
sub-agents
±changed
+15−11
claude-codechanged
sub-agents
<span id="inline-server-trust" />Claude Code loads an inline server from an agent file in your project's `.claude/agents/` directory, or in an `--add-dir` directory's `.claude/agen
The MCP restrictions that apply to the main session also cover servers declared in subagent frontmatter:
* [`--strict-mcp-config`](/docs/en/cli-reference) and [`--bare`](/docs/en/cli-reference)
* [Enterprise managed MCP configuration](/docs/en/managed-mcp)
+15 −11 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
sessions
±changed
+12−3
claude-codechanged
sessions
You can run `claude --resume <session-id>` from any directory, so you can resume a session that started elsewhere or moved with [`/cd`](/docs/en/commands). Claude Code looks for th
1. The current project directory and its git worktrees
2. Every other project on this machine
+12 −3 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
managed-settings
±changed
+12−5
claude-codechanged
managed-settings
4. The HKCU registry, on Windows, and on WSL once the HKLM registry or the Windows managed settings file turns [`wslInheritsWindowsSettings`](/docs/en/settings-reference#wslinherit
<span id="present-admin-documents" />
Claude Code never applies the user-writable HKCU registry beneath an admin document that is present. A document is present when it sets any policy key to a value other than `null`,
+12 −5 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
desktop
±changed
+8−6
claude-codechanged
desktop
<span id="auto-mode-availability" />
Auto mode is available to all users on the Anthropic API and requires Claude Opus 4.6 or later, Sonnet 4.6 or later, or a [Fable model](/docs/en/model-config#work-with-fable). Orga
In Enterprise deployments that route Desktop to Google Cloud's Agent Platform, auto mode is also available by default; see [Auto mode on Bedrock, Agent Platform, or Foundry](/docs/
+8 −6 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
claude-directory
±changed
+5−3
claude-codechanged
claude-directory
<span id="state-files-to-keep" />
Other files appear depending on which features you use. Caches and lock files are safe to delete. Keep these state files:
<h4 id="state-files-to-keep">
State files to keep
+5 −3 lines
Upstream edited 2 Oct 2026 13:32 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
mcp
±changed
+2−0
claude-codechanged
mcp
After you resume a session, Claude can call a tool from the saved conversation while the tool's MCP server is still connecting. While the server is on its first connection attempt,
+2 −0 lines
Upstream edited 2 Oct 2026 13:29 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
vs-code
±changed
+22−2
claude-codechanged
vs-code
* **Model**: select **Switch model…** from the command menu to change the model mid-session. You can also click the model name at the bottom of the prompt box to open the same pick
* **Model**: select **Switch model…** from the command menu to change the model mid-session. You can also click the model name at the bottom of the prompt box to open the same pick
| `showMessageTimestamps` | `false` | Show when each message was sent. A date line marks where the day changes. Requires Claude Code v2.1.284 or later |
| `environmentVariables` | `[]` | Set environment variables for the Claude process. Use Claude Code settings instead for shared config. |
| `environmentVariables` | `[]` | Set environment variables for the Claude process. Use Claude Code settings instead for shared config. A [`CLAUDE_CONFIG_DIR`](/docs/en/env-vars) e
+22 −2 lines
Upstream edited 2 Oct 2026 13:26 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
interactive-mode
±changed
+3−3
claude-codechanged
interactive-mode
Run `/recap` to generate a summary on demand. Claude Code caps both automatic recaps and `/recap` output at 400 characters. To turn automatic recaps off, open `/config` and turn of
Session recap is on by default for every plan and provider. The recap is always skipped in non-interactive mode.
Run `/recap` to generate a summary on demand. It runs only when you ask for it yourself. When it arrives in a message relayed from a Slack, Teams, or project thread, or in a prompt
+3 −3 lines
Upstream edited 2 Oct 2026 13:24 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
settings-reference
±changed
+2−1
claude-codechanged
settings-reference
* Windows variables that pick the programs and machine-wide configuration for the processes Claude Code starts, such as `SystemRoot`, `ComSpec`, `ProgramData`, `LOCALAPPDATA`, `P
* `"customEndpoint"`: the Anthropic API or a cloud provider's API sent to another host, such as an [LLM gateway](/docs/en/llm-gateway) named by `ANTHROPIC_BASE_URL`, a provider's
* `"customEndpoint"`: the Anthropic API or a cloud provider's API sent to another host, such as an [LLM gateway](/docs/en/llm-gateway) named by `ANTHROPIC_BASE_URL` or by a provi
+2 −1 lines
Upstream edited 2 Oct 2026 13:24 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
microsoft-foundry
±changed
+2−0
claude-codechanged
microsoft-foundry
Set `ANTHROPIC_FOUNDRY_RESOURCE` to the resource name alone, such as `my-resource`. Claude Code [refuses a URL or host name](/docs/en/errors#anthropic-foundry-resource-must-be-a-fo
+2 −0 lines
Upstream edited 2 Oct 2026 13:24 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
memory
±changed
+10−1
claude-codechanged
memory
To toggle it, open `/memory` in a session and use the auto memory toggle, which saves `autoMemoryEnabled` to your user settings at `~/.claude/settings.json`. To turn it off for a s
To toggle it, open `/memory` in a session and use the auto memory toggle, which saves `autoMemoryEnabled` to your user settings at `~/.claude/settings.json`.
The toggle turns auto memory off but doesn't turn it back on in these sessions:
+10 −1 lines
Upstream edited 2 Oct 2026 13:24 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
sandboxing
±changed
+3−3
claude-codechanged
sandboxing
When you define the same filesystem array in multiple [settings scopes](/docs/en/settings#settings-precedence), Claude Code merges them, combining paths from every scope rather tha
When you define the same filesystem array in multiple [settings scopes](/docs/en/settings#settings-precedence), Claude Code merges them, combining the paths rather than replacing o
The example below blocks reading from the entire home directory while still allowing reads from the current project. Place it in your project's `.claude/settings.json`, because the
The example below blocks reading from the entire home directory while still allowing reads from the current project. Place it in your project's `.claude/settings.json`, because the
Which files can set a port depends on your other sandbox settings:
+3 −3 lines
Upstream edited 2 Oct 2026 13:17 UTC Recorded here 2 Oct 2026 13:37 UTC
claude-code
claude-tag
±changed
+1−1
claude-codechanged
claude-tag
No line of the body moved in this read.
+1 −1 lines
Recorded here 2 Oct 2026 13:07 UTC
claude-docs
claude-tag/users/troubleshooting
±changed
+4−1
claude-docschanged
claude-tag/users/troubleshooting
3. **Is Claude Tag turned on for this channel?** Mention it again now that it's invited. **Works**: it reacts and replies. **Fails**: it replies "Claude is disabled in this channel
3. **Is Claude Tag turned on for this channel?** Mention it again now that it's invited. **Works**: it reacts and replies. **Fails**: Claude replies in one of these ways, and each
* **A notice that starts "Claude isn't on in this channel yet"**: your admin hasn't finished setting up Claude Tag. Send them [Launch Claude Tag](/docs/claude-tag/admins/setup-o
* **A notice that says "Claude is disabled in this channel"**: Claude Tag is turned off for the channel, its workspace, or the organization. Send them [Claude is disabled in thi
* **A reply that behaves like the earlier Claude in Slack**: the channel is set to **Legacy**. Replies have no channel memory, and pull requests open under your name rather than
+4 −1 lines
Upstream edited 2 Oct 2026 13:01 UTC Recorded here 2 Oct 2026 13:07 UTC
claude-docs
claude-tag/admins/troubleshooting
±changed
+1−1
claude-docschanged
claude-tag/admins/troubleshooting
| A reply from Claude while you're still in setup | "Claude is disabled in this channel. Your admin can re-enable it here." | Claude Tag isn't turned on until you finish [Launch Cl
| A reply from Claude while you're still in setup | A notice that starts "Claude isn't on in this channel yet." | Claude Tag isn't turned on until you finish [Launch Claude Tag](/d
+1 −1 lines
Upstream edited 2 Oct 2026 13:01 UTC Recorded here 2 Oct 2026 13:07 UTC
claude-docs
claude-tag/admins/setup-overview
±changed
+5−3
claude-docschanged
claude-tag/admins/setup-overview
Pairing covers the whole workspace. Claude doesn't answer mentions in Slack until you finish [Launch Claude Tag](#launch-claude-tag). A mention before then gets "Claude is disabled
Pairing covers the whole workspace. Claude doesn't answer mentions in Slack until you finish [Launch Claude Tag](#launch-claude-tag). A mention before then gets a notice that start
The **Let members know they can now tag Claude** toggle is on by default. After launch, Claude DMs each member of the workspace to help them get started. Those DMs don't count
If you paired a whole Enterprise Grid, skip this step. The launch step doesn't show the toggle, launching doesn't send the DMs, and the admin page has no row for them.
+5 −3 lines
Upstream edited 2 Oct 2026 13:01 UTC Recorded here 2 Oct 2026 13:07 UTC
claude-code
permissions
±changed
+10−0
claude-codechanged
permissions
A permission prompt shows what Claude is about to do, followed by your options. This example is the prompt for a Bash command, from a session in Manual mode:
<Frame>
<img src="https://mintcdn.com/claude-code/oa7CKjMeIChox26S/images/permission-prompt-bash-light.png?fit=max&auto=format&n=oa7CKjMeIChox26S&q=85&s=87585d008a29304873466399f7b476f6"
+10 −0 lines
Upstream edited 2 Oct 2026 12:54 UTC Recorded here 2 Oct 2026 13:07 UTC
claude-code
permission-modes
±changed
+9−1
claude-codechanged
permission-modes
**During a session**: press `Shift+Tab` to cycle permission modes. From `auto`, the first press switches to `default`, and the cycle then runs `default` → `acceptEdits` → `plan
**During a session**: press `Shift+Tab` to cycle permission modes. From `auto`, the first press switches to `default`, and the cycle then runs `default` → `acceptEdits` → `plan
Watch the status bar in this clip of a session that started in auto mode. Each time you press `Shift+Tab`, it changes from `auto mode on` to `manual mode on`, `accept edits on`
+9 −1 lines
Upstream edited 2 Oct 2026 12:54 UTC Recorded here 2 Oct 2026 13:07 UTC
claude-code
claude-tag
±changed
+1−1
claude-codechanged
claude-tag
No line of the body moved in this read.
+1 −1 lines
Recorded here 2 Oct 2026 07:37 UTC
claude-code
setup
±changed
+5−5
claude-codechanged
setup
```bash theme={null} theme={null} theme={null} theme={null}
```bash theme={null}
```powershell theme={null} theme={null} theme={null} theme={null}
```powershell theme={null}
```batch theme={null} theme={null} theme={null} theme={null}
+5 −5 lines
Upstream edited 2 Oct 2026 07:14 UTC Recorded here 2 Oct 2026 07:37 UTC
claude-docs
connectors/slack/index
±changed
+1−1
claude-docschanged
connectors/slack/index
* [Get started with connectors](/docs/connectors/getting-started): set up another connector and use it in conversations
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+1 −1 lines
Recorded here 2 Oct 2026 06:37 UTC
claude-docs
connectors/github/index
±changed
+1−1
claude-docschanged
connectors/github/index
* [Get started with connectors](/docs/connectors/getting-started): set up another connector and use it in conversations
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+1 −1 lines
Recorded here 2 Oct 2026 06:37 UTC
claude-code
claude-tag
±changed
+9−10
claude-codechanged
claude-tag
No line of the body moved in this read.
+9 −10 lines
Recorded here 2 Oct 2026 06:37 UTC
claude-docs
third-party/claude-desktop/in-app-configuration
±changed
+2−0
claude-docschanged
third-party/claude-desktop/in-app-configuration
Developer mode stays on across restarts. To turn it off again, go to **Developer → Open Developer Config File**, change `"allowDevTools": true` to `false` in the file that opens (o
+2 −0 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
connectors/microsoft/365
±changed
+4−4
claude-docschanged
connectors/microsoft/365
> * If your organization runs Claude Desktop on third-party inference, see [Connect to Microsoft 365](/docs/third-party/claude-desktop/connectors-m365.md) instead
> * If you're in a US government deployment, see [Set up the Microsoft 365 connector](/docs/government/connectors/microsoft-365.md) in the government section
> * If your organization runs Claude Desktop on third-party inference, see [Connect to Microsoft 365](https://claude.com/docs/third-party/claude-desktop/connectors-m365.md) instead
> * If you're in a US government deployment, see [Set up the Microsoft 365 connector](https://claude.com/docs/government/connectors/microsoft-365.md) in the government section
* [Add a connector from the directory](/docs/connectors/getting-started.md#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+4 −4 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 23 Oct 2026 18:07 UTC
claude-docs
connectors/google/gmail
±changed
+6−6
claude-docschanged
connectors/google/gmail
> If your organization uses Outlook, see [Microsoft 365](/docs/connectors/microsoft/365.md) instead.
> If your organization uses Outlook, see [Microsoft 365](https://claude.com/docs/connectors/microsoft/365.md) instead.
On Team and Enterprise plans, Gmail doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, including trou
On Team and Enterprise plans, Gmail doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, including trou
* [Google Calendar](/docs/connectors/google/calendar.md): access your calendar information
+6 −6 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 23 Oct 2026 18:07 UTC
claude-docs
connectors/google/drive
±changed
+7−7
claude-docschanged
connectors/google/drive
> If you want Claude to search your email or calendar rather than your files, see [Gmail](/docs/connectors/google/gmail.md) or [Google Calendar](/docs/connectors/google/calendar.md
> If you want Claude to search your email or calendar rather than your files, see [Gmail](https://claude.com/docs/connectors/google/gmail.md) or [Google Calendar](https://claude.co
On Team and Enterprise plans, Google Drive doesn't appear in your connector list until an Owner adds it for your organization. Each member then connects their own Google account. F
On Team and Enterprise plans, Google Drive doesn't appear in your connector list until an Owner adds it for your organization. Each member then connects their own Google account. F
* [Gmail](/docs/connectors/google/gmail.md): search and analyze your emails
+7 −7 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 23 Oct 2026 18:07 UTC
claude-docs
connectors/google/calendar
±changed
+6−6
claude-docschanged
connectors/google/calendar
> If your organization uses Outlook or Teams calendars, see [Microsoft 365](/docs/connectors/microsoft/365.md) instead.
> If your organization uses Outlook or Teams calendars, see [Microsoft 365](https://claude.com/docs/connectors/microsoft/365.md) instead.
On Team and Enterprise plans, Google Calendar doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, incl
On Team and Enterprise plans, Google Calendar doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, incl
* [Gmail](/docs/connectors/google/gmail.md): search and analyze your emails
+6 −6 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 23 Oct 2026 18:07 UTC
claude-docs
connectors/microsoft/365
±changed
+4−4
claude-docschanged
connectors/microsoft/365
> * If your organization runs Claude Desktop on third-party inference, see [Connect to Microsoft 365](/docs/third-party/claude-desktop/connectors-m365) instead
> * If you're in a US government deployment, see [Set up the Microsoft 365 connector](/docs/government/connectors/microsoft-365) in the government section
> * If your organization runs Claude Desktop on third-party inference, see [Connect to Microsoft 365](/docs/third-party/claude-desktop/connectors-m365.md) instead
> * If you're in a US government deployment, see [Set up the Microsoft 365 connector](/docs/government/connectors/microsoft-365.md) in the government section
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+4 −4 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 22 Oct 2026 18:07 UTC
claude-docs
connectors/google/gmail
±changed
+6−6
claude-docschanged
connectors/google/gmail
> If your organization uses Outlook, see [Microsoft 365](/docs/connectors/microsoft/365) instead.
> If your organization uses Outlook, see [Microsoft 365](/docs/connectors/microsoft/365.md) instead.
On Team and Enterprise plans, Gmail doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, including trou
On Team and Enterprise plans, Gmail doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, including trou
* [Google Calendar](/docs/connectors/google/calendar): access your calendar information
+6 −6 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 22 Oct 2026 18:07 UTC
claude-docs
connectors/google/drive
±changed
+7−7
claude-docschanged
connectors/google/drive
> If you want Claude to search your email or calendar rather than your files, see [Gmail](/docs/connectors/google/gmail) or [Google Calendar](/docs/connectors/google/calendar).
> If you want Claude to search your email or calendar rather than your files, see [Gmail](/docs/connectors/google/gmail.md) or [Google Calendar](/docs/connectors/google/calendar.md
On Team and Enterprise plans, Google Drive doesn't appear in your connector list until an Owner adds it for your organization. Each member then connects their own Google account. F
On Team and Enterprise plans, Google Drive doesn't appear in your connector list until an Owner adds it for your organization. Each member then connects their own Google account. F
* [Gmail](/docs/connectors/google/gmail): search and analyze your emails
+7 −7 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 22 Oct 2026 18:07 UTC
claude-docs
connectors/google/calendar
±changed
+6−6
claude-docschanged
connectors/google/calendar
> If your organization uses Outlook or Teams calendars, see [Microsoft 365](/docs/connectors/microsoft/365) instead.
> If your organization uses Outlook or Teams calendars, see [Microsoft 365](/docs/connectors/microsoft/365.md) instead.
On Team and Enterprise plans, Google Calendar doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, incl
On Team and Enterprise plans, Google Calendar doesn't appear in your connector list until an Owner or Primary Owner enables it for your organization. For the full walkthrough, incl
* [Gmail](/docs/connectors/google/gmail): search and analyze your emails
+6 −6 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 22 Oct 2026 18:07 UTC
claude-docs
connectors/microsoft/365
±changed
+70−80
claude-docschanged
connectors/microsoft/365
<Note>
* If your organization runs Claude Desktop on third-party inference, see [Connect to Microsoft 365](/docs/third-party/claude-desktop/connectors-m365) instead
* If you're in a US government deployment, see [Set up the Microsoft 365 connector](/docs/government/connectors/microsoft-365) in the government section
</Note>
> [!NOTE]
+70 −80 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 20 Oct 2026 18:07 UTC
claude-docs
connectors/google/gmail
±changed
+12−14
claude-docschanged
connectors/google/gmail
<Note>
If your organization uses Outlook, see [Microsoft 365](/docs/connectors/microsoft/365) instead.
</Note>
> [!NOTE]
>
+12 −14 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 20 Oct 2026 18:07 UTC
claude-docs
connectors/google/drive
±changed
+39−47
claude-docschanged
connectors/google/drive
<Note>
If you want Claude to search your email or calendar rather than your files, see [Gmail](/docs/connectors/google/gmail) or [Google Calendar](/docs/connectors/google/calendar).
</Note>
> [!NOTE]
>
+39 −47 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 20 Oct 2026 18:07 UTC
claude-docs
connectors/google/calendar
±changed
+12−14
claude-docschanged
connectors/google/calendar
<Note>
If your organization uses Outlook or Teams calendars, see [Microsoft 365](/docs/connectors/microsoft/365) instead.
</Note>
> [!NOTE]
>
+12 −14 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 20 Oct 2026 18:07 UTC
claude-docs
connectors/microsoft/365
±changed
+1−1
claude-docschanged
connectors/microsoft/365
* [Get started with connectors](/docs/connectors/getting-started): set up another connector and use it in conversations
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+1 −1 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
connectors/google/gmail
±changed
+1−0
claude-docschanged
connectors/google/gmail
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+1 −0 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
connectors/google/drive
±changed
+1−0
claude-docschanged
connectors/google/drive
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+1 −0 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
connectors/google/calendar
±changed
+1−0
claude-docschanged
connectors/google/calendar
* [Add a connector from the directory](/docs/connectors/getting-started#add-a-connector-from-the-directory): find a connector for another service in the directory and connect it
+1 −0 lines
Upstream edited 2 Oct 2026 06:33 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/restrict-access
±changed
+10−4
claude-docschanged
claude-tag/admins/restrict-access
3. **Turn the scope's Enable Claude Tag switch off.** Claude stops responding in that scope even if someone invites it back; an @-mention gets a disabled notice instead of a reply.
3. **Turn the scope's Enable Claude Tag switch off.** Claude stops responding in that scope even if someone invites it back; an @-mention gets a disabled notice instead of a reply.
* Turn the **Enable Claude Tag** switch on or off at **Default Slack**, a workspace, or a channel
* Set up [**Managed by**](/docs/claude-tag/admins/managed-by) for a channel, on the **Admin** tab of the channel's Configure page
* **Owner-only**: turning Claude Tag on or off, the [**Allow direct messages**](#allow-or-disable-direct-messages) toggle, the [**Member access**](#restrict-who-can-use-claude) res
+10 −4 lines
Upstream edited 2 Oct 2026 06:32 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/managed-by
±changed
+3−1
claude-docschanged
claude-tag/admins/managed-by
Setting up **Managed by** takes an Owner of your Claude organization or a [Claude Tag admin](/docs/claude-tag/admins/restrict-access#delegate-claude-tag-administration), the roles
On the Enterprise plan, an Owner of your Claude organization or a [Claude Tag admin](/docs/claude-tag/admins/restrict-access#delegate-claude-tag-administration) sets up **Managed b
A managing channel isn't a [channel manager](/docs/claude-tag/admins/restrict-access#delegate-channel-setup-to-channel-managers). A channel manager is a person with a role that let
+3 −1 lines
Upstream edited 2 Oct 2026 06:32 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/healthcare
±changed
+3−1
claude-docschanged
claude-tag/admins/healthcare
Any member of the workspace can still invite `@Claude` to a channel that isn't approved. Claude stays silent there, and an @-mention gets a notice that Claude is disabled in that c
Any member of the workspace can still invite `@Claude` to a channel that isn't approved. Claude stays silent there, and an @-mention gets a notice that Claude is disabled in that c
Only an Owner of your Claude organization or a [Claude Tag admin](/docs/claude-tag/admins/restrict-access#delegate-claude-tag-administration) can change an **Enable Claude Tag** sw
+3 −1 lines
Upstream edited 2 Oct 2026 06:32 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/for-slack-admins
±changed
+1−1
claude-docschanged
claude-tag/admins/for-slack-admins
A Claude organization admin can also set [auto-join channel patterns](/docs/claude-tag/admins/restrict-access#block-or-auto-join-channels-by-name), so Claude joins a public channel
A Claude organization Owner can also set [auto-join channel patterns](/docs/claude-tag/admins/restrict-access#block-or-auto-join-channels-by-name), so Claude joins a public channel
+1 −1 lines
Upstream edited 2 Oct 2026 06:32 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/customize
±changed
+1−1
claude-docschanged
claude-tag/admins/customize
| Managed by | Which other Slack channels' members can write a channel's standing instructions by asking Claude, including from a private channel. An Owner or a [Claude Tag admin](
| Managed by | Which other Slack channels' members can write a channel's standing instructions by asking Claude, including from a private channel. On the Enterprise plan, an Owner
+1 −1 lines
Upstream edited 2 Oct 2026 06:32 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/attach-to-scope
±changed
+1−1
claude-docschanged
claude-tag/admins/attach-to-scope
This page covers adding access to more workspaces and channels, and how access stacks when several bundles apply to the same place. It assumes you have already [paired a workspace]
This page covers adding access to more workspaces and channels, and how access stacks when several bundles apply to the same place. It assumes you have already [paired a workspace]
+1 −1 lines
Upstream edited 2 Oct 2026 06:32 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/concepts/security-and-data
±changed
+7−7
claude-docschanged
claude-tag/concepts/security-and-data
Every channel request, whether a person typed it or a schedule triggered it, follows the same path: it runs in an isolated sandbox that holds no credentials. In an Anthropic-hosted
Every channel request, whether a person typed it or a schedule triggered it, follows the same path: it runs in an isolated sandbox, and the credentials you provision aren't placed
<img className="block dark:hidden" src="https://mintcdn.com/claude-ai/oY6LusJt4c576Dc3/images/claude-tag/diagrams/request-path.svg?fit=max&auto=format&n=oY6LusJt4c576Dc3&q=85&s=a7f
<img className="block dark:hidden" src="https://mintcdn.com/claude-ai/lijct3C2aoA3LHFn/images/claude-tag/diagrams/request-path.svg?fit=max&auto=format&n=lijct3C2aoA3LHFn&q=85&s=10d
<img className="hidden dark:block" src="https://mintcdn.com/claude-ai/oY6LusJt4c576Dc3/images/claude-tag/diagrams/request-path-dark.svg?fit=max&auto=format&n=oY6LusJt4c576Dc3&q=85&
+7 −7 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/concepts/data-lifecycle
±changed
+3−3
claude-docschanged
claude-tag/concepts/data-lifecycle
| An Owner deletes a routine from the [**Scheduled work** tab](/docs/claude-tag/admins/audit#what-the-audit-view-lists), or someone asks Claude to delete it in the channel or direc
| An Owner deletes a channel's routine from the [**Scheduled work** tab](/docs/claude-tag/admins/audit#what-the-audit-view-lists), or someone asks Claude to delete a routine in the
Routines a member set up in a direct message belong to that member's Claude account. An Owner can delete them from the **Scheduled work** tab, or the member can ask Claude in the d
Routines a member set up in a direct message belong to that member's Claude account. The member can ask Claude in the direct message to delete one. They are turned off when the mem
* **Delete a routine** from the **Scheduled work** tab, or ask Claude to delete it in the channel or direct message where it was set up. See [Audit Claude Tag activity](/docs/claud
+3 −3 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/concepts/agent-identity
±changed
+3−3
claude-docschanged
claude-tag/concepts/agent-identity
In Slack channels, Claude acts with its own service accounts, rather than as a specific user. An organization Owner [provisions this identity during setup](/docs/claude-tag/admins/
In Slack channels, Claude acts with its own service accounts, rather than as a specific user. An organization Owner [provisions this identity](/docs/claude-tag/admins/setup-overvie
<img className="block dark:hidden" src="https://mintcdn.com/claude-ai/oY6LusJt4c576Dc3/images/claude-tag/diagrams/request-path.svg?fit=max&auto=format&n=oY6LusJt4c576Dc3&q=85&s=a7f
<img className="block dark:hidden" src="https://mintcdn.com/claude-ai/lijct3C2aoA3LHFn/images/claude-tag/diagrams/request-path.svg?fit=max&auto=format&n=lijct3C2aoA3LHFn&q=85&s=10d
<img className="hidden dark:block" src="https://mintcdn.com/claude-ai/oY6LusJt4c576Dc3/images/claude-tag/diagrams/request-path-dark.svg?fit=max&auto=format&n=oY6LusJt4c576Dc3&q=85&
+3 −3 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/workspaces
±changed
+1−1
claude-docschanged
claude-tag/admins/workspaces
Deletion starts as soon as you confirm and runs to completion in the background. This can't be undone. Routines a person set up in a direct message with Claude belong to that per
Deletion starts as soon as you confirm and runs to completion in the background. This can't be undone. Routines a person set up in a direct message with Claude belong to that per
+1 −1 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/skills-repo
±changed
+1−1
claude-docschanged
claude-tag/admins/skills-repo
Every skill change reaches channels only after a human approves the merge; Claude opens the PR, you merge it.
Claude opens the PR, and you merge it. To require a person's approval before a change reaches the default branch, see [Require a second approval on Claude's pull requests](/docs/cl
+1 −1 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/audit
±changed
+2−2
claude-docschanged
claude-tag/admins/audit
| **Scheduled work** | Every routine across your organization, with a **Scope** filter and a per-row **⋮** menu (View details, Pause/Resume, Delete) |
| **Scheduled work** | The routines set up in channels across your organization, with a **Scope** filter and a per-row **⋮** menu (View details, Pause/Resume, Delete) |
In channels, Claude acts as itself, so each action there carries the service-account identity:
In channels, Claude acts as itself unless a task uses a member's [personal connectors](/docs/claude-tag/concepts/personal-connectors), which run with that member's permissions and
+2 −2 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/add-connections
±changed
+5−7
claude-docschanged
claude-tag/admins/add-connections
If you're in [setup](/docs/claude-tag/admins/setup-overview), you add these connections there; skip to [Decide what to connect](#decide-what-to-connect). The steps below are for cr
You create your first bundle on the admin page, after you finish [setup](/docs/claude-tag/admins/setup-overview) and launch.
* **Ports**: needed only when the service listens on something other than 443
For example, to let Claude check a vendor's status page at `status.example.org`, enter `status.example.org` in the **Domain** field and leave the **Ports** field empty.
+5 −7 lines
Upstream edited 2 Oct 2026 06:25 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
errors
±changed
+41−16
claude-codechanged
errors
| `Cannot add MCP server: your organization's managed settings allow only MCP servers that plugins provide` | [Command-line errors](#cannot-add-mcp-server-when-managed-settings-all
* A server error or overloaded response that arrives after Claude has finished thinking but before it has started any text or tool call. Claude Code retries a server error at that
In an interactive session signed in with a claude.ai subscription, Claude Code can also wait in the open session and continue the interrupted task shortly after the reset. While it
In an interactive session signed in with a claude.ai subscription, Claude Code can also wait in the open session and continue the interrupted task shortly after the reset. See [Wai
If the machine also holds an Anthropic-issued credential and the managed settings set `forceLoginMethod` or `forceLoginOrgUUID`, Claude Code exits at startup instead. That credenti
+41 −16 lines
Upstream edited 2 Oct 2026 06:22 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
sub-agents
±changed
+6−8
claude-codechanged
sub-agents
* **Model**: inherits from the main conversation, capped at Opus on the Claude API, so Explore never runs on a more expensive model than the one you already chose for the sessi
* **Model**: the main conversation's model. When the main conversation runs Fable, Explore's model depends on how you connect:
* With a Claude subscription, an Anthropic Console account, or an [LLM gateway](/docs/en/llm-gateway) reached through `ANTHROPIC_BASE_URL`, Explore runs on the Opus model tha
* On Amazon Bedrock, Google Cloud's Agent Platform, Microsoft Foundry, [Claude Platform on AWS](/docs/en/claude-platform-on-aws), or a [Claude apps gateway](/docs/en/claude-a
As of v2.1.198, Explore inherits the main conversation's model instead of always running on Haiku. On the Claude API, the inherited model is capped at Opus: a main conversation
+6 −8 lines
Upstream edited 2 Oct 2026 06:22 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
feature-availability
±changed
+1−1
claude-codechanged
feature-availability
* **Subagents**: the built-in [Explore subagent](/docs/en/sub-agents#built-in-subagents) caps its inherited model at Opus on the Claude API, and inherits the main conversation's mo
* **Subagents**: when the main conversation runs Fable, the built-in [Explore subagent](/docs/en/sub-agents#built-in-subagents) runs on Opus with a Claude subscription, an Anthropi
+1 −1 lines
Upstream edited 2 Oct 2026 06:22 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
vs-code
±changed
+13−5
claude-codechanged
vs-code
* A plugin that failed to load shows a short reason on its row. Click the reason for what you can do about it, including copying the full error message to look up in [Troubleshoo
| `marketplace` | Where the plugin comes from: a GitHub `owner/repo`, an `https://` URL, or a git SSH URL such as `[email protected]:owner/repo.git`. Defaults to `anthropics/claude-pl
Some values that the [Marketplaces tab](#manage-marketplaces) accepts don't work in a link, such as a local path or an `http://` address. For those, VS Code shows an error message
+13 −5 lines
Upstream edited 2 Oct 2026 06:21 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
remote-control
±changed
+2−2
claude-codechanged
remote-control
* **Some commands are local-only**: commands that only run in the terminal interface, such as `/plugin` or `/resume`, work only from the local CLI, whether or not you pass an argum
* **Some commands are local-only**: commands that only run in the terminal interface, such as `/plugin` or `/resume`, work only from the local CLI, whether or not you pass an argum
* `/mcp`: from the mobile app, returns a text summary of server status instead of opening the picker. On the web, `/mcp` on its own opens a directory of [claude.ai connectors](/d
* `/mcp`: from the mobile app, returns a text summary of server status instead of opening the picker. On the web, `/mcp` on its own opens a directory of [claude.ai connectors](/d
+2 −2 lines
Upstream edited 2 Oct 2026 06:20 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
mcp
±changed
+4−0
claude-codechanged
mcp
#### Retry failed servers yourself
To retry every server that failed or needs authentication, run `/mcp reconnect all`. In the interactive terminal this requires Claude Code v2.1.284 or later, and earlier versions p
+4 −0 lines
Upstream edited 2 Oct 2026 06:20 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
managed-mcp
±changed
+57−31
claude-codechanged
managed-mcp
Servers your organization delivers through `managedMcpServers` load without an allowlist entry, and [How a server is evaluated](#how-a-server-is-evaluated) covers `managed-mcp.json
Servers your organization delivers through `managedMcpServers` load without an allowlist entry, and [Servers that skip the allowlist check](#servers-that-skip-the-allowlist-check)
| `serverName` | The user-assigned label. Exact match only; wildcards are not expanded | Either type, but see the Warning below |
| `serverName` | The user-assigned label. Exact match only; wildcards are not expanded | Either type, but see [How `serverName` entries match](#how-servername-entries-match) |
| `allowedMcpServers` | All servers allowed | No servers allowed, apart from [those that skip the allowlist check](#how-a-server-is-evaluated) | Only matching servers allowed, apar
+57 −31 lines
Upstream edited 2 Oct 2026 06:16 UTC Recorded here 4 Oct 2026 05:37 UTC
claude-code
managed-mcp
±changed
+1−0
claude-codechanged
managed-mcp
| [`strictPluginOnlyCustomization`](/docs/en/settings-reference#strictpluginonlycustomization) is `true` or includes `mcp`, and the user runs `claude mcp add` | [`Cannot add MCP se
+1 −0 lines
Upstream edited 2 Oct 2026 06:16 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/overview
±changed
+9−9
claude-docschanged
claude-tag/overview
<span className="tm-qrow-sub">Pair your Slack workspace, connect the services Claude will work in, launch, and test that it works</span>
<span className="tm-qrow-sub">Pair your Slack workspace, launch, and test that it works</span>
* **Connect the services Claude will work in**: for each one, such as your issue tracker or data warehouse, create an account for Claude and enter its credential.
* **Grant repositories**: choose which repositories the Claude GitHub App can reach.
* **Set a monthly spend limit and launch**.
+9 −9 lines
Upstream edited 2 Oct 2026 06:14 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/concepts/settings-map
±changed
+1−1
claude-docschanged
claude-tag/concepts/settings-map
* [Set up Claude Tag](/docs/claude-tag/admins/setup-overview): where each setting is first created during setup
* [Set up Claude Tag](/docs/claude-tag/admins/setup-overview): pair a workspace, launch, and give Claude access
+1 −1 lines
Upstream edited 2 Oct 2026 06:14 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/troubleshooting
±changed
+2−1
claude-docschanged
claude-tag/admins/troubleshooting
| **Launch Claude Tag** to finish | "Couldn't turn on personal connectors in channels. Try again." | Launch didn't finish. Click **Launch Claude Tag** again. |
| Claude to join the channels you selected on the **Launch Claude Tag** step | "Couldn't add Claude to some channels. Add Claude from Slack instead." | Claude Tag is on, but Claude
| The **Connect GitHub** step to list your organization's repositories | "The Claude app is installed on \[username], a personal account. Claude Tag connects to a GitHub organizati
+2 −1 lines
Upstream edited 2 Oct 2026 06:14 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/setup-overview
±changed
+101−92
claude-docschanged
claude-tag/admins/setup-overview
> Set up Claude Tag for your organization: pair your Slack workspace, choose and connect Claude's tools, set a spending limit, launch, and test that it works. Every step on one pag
> Set up Claude Tag for your organization: pair your Slack workspace, add Claude to channels, launch, give Claude access to your tools, and check that it works.
Claude Tag is Claude working in your team's Slack channels. It can also act in your other tools, like your issue tracker or data warehouse, through accounts you create for it durin
Go to [`claude.ai/admin-settings/claude-tag`](https://claude.ai/admin-settings/claude-tag) and click **Start setup** (**Resume setup** if you started earlier). The setup page walks
+101 −92 lines
Upstream edited 2 Oct 2026 06:14 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-docs
claude-tag/admins/configure-github
±changed
+0−2
claude-docschanged
claude-tag/admins/configure-github
<Tip>If you link your GitHub organization before running [setup](/docs/claude-tag/admins/setup-overview), setup includes a step for granting repository access inline, so you don't
+0 −2 lines
Upstream edited 2 Oct 2026 06:14 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
ultrareview
±changed
+1−1
claude-codechanged
ultrareview
If the subcommand exits before the findings arrive, they never reach your terminal, and running it again starts a new review rather than resuming that one. The new review [counts a
If the subcommand exits before the findings arrive, they never reach your terminal. The review may still be running in the cloud. Running the subcommand again starts a new review r
+1 −1 lines
Upstream edited 2 Oct 2026 06:08 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
llm-gateway-protocol
±changed
+18−3
claude-codechanged
llm-gateway-protocol
| [Context management](https://platform.claude.com/docs/en/build-with-claude/context-editing) | Context management beta header pairs with the `context_management` body field | `400
| [Context management](https://platform.claude.com/docs/en/build-with-claude/context-editing) | Context management beta header pairs with the `context_management` body field | `400
| [Effort](https://platform.claude.com/docs/en/build-with-claude/effort) and [structured outputs](https://platform.claude.com/docs/en/build-with-claude/structured-outputs) | The `o
| [Effort](https://platform.claude.com/docs/en/build-with-claude/effort) and [structured outputs](https://platform.claude.com/docs/en/build-with-claude/structured-outputs) | The `o
* When the upstream rejects `output_config.effort`, Claude Code retries the request without effort and leaves it out of later requests to that model until Claude Code exits. Claude
+18 −3 lines
Upstream edited 2 Oct 2026 06:08 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
interactive-mode
±changed
+9−6
claude-codechanged
interactive-mode
While Claude Code waits, a line at the bottom of the session shows when it will continue:
While Claude Code waits, the lines at the bottom of the session show when your limit resets and when Claude will continue:
Usage limit reached · continuing automatically at 3:45pm · esc to cancel
Usage limit reached · limit resets 3:45pm
Continuing automatically at 3:45pm · esc to cancel
+9 −6 lines
Upstream edited 2 Oct 2026 06:08 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
code-review
±changed
+1−1
claude-codechanged
code-review
* You run it in non-interactive mode, with the `-p` flag or the Agent SDK; Claude Code waits for the review and includes the findings in the response, except for `ultra`, which [la
* You run it in non-interactive mode, with the `-p` flag or the Agent SDK; Claude Code waits for the review and includes the findings in the response, except for `ultra`, which [do
+1 −1 lines
Upstream edited 2 Oct 2026 06:08 UTC Recorded here 2 Oct 2026 06:37 UTC
claude-code
claude-tag
±changed
+2−2
claude-codechanged
claude-tag
No line of the body moved in this read.
+2 −2 lines
Recorded here 2 Oct 2026 06:07 UTC
claude-code
plugins/troubleshooting
±changed
+19−10
claude-codechanged
plugins/troubleshooting
* For a source that differs from its settings declaration, re-add the marketplace from the declared source or change the declaration. `claude plugin marketplace add` refuses the sa
* For a source that differs from its settings declaration, re-add the marketplace from the declared source or change the declaration. `claude plugin marketplace add` refuses the sa
<h3 id="cannot-add-marketplace-its-network-source-differs">
`Cannot add marketplace "<name>": its network source differs from the one declared for it in settings`
</h3>
+19 −10 lines
Upstream edited 2 Oct 2026 06:05 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
plugins/marketplace-reference
±changed
+2−2
claude-codechanged
plugins/marketplace-reference
| `git-subdir` | `url`, `path`, `ref`, `sha` | One subdirectory of a git repository, fetched with a sparse partial clone |
| `git-subdir` | `url`, `path`, `ref`, `sha` | One subdirectory of a git repository, fetched with a sparse checkout |
`url` accepts a full git URL or GitHub `owner/repo` shorthand. `path` is the subdirectory that holds the plugin, and Claude Code downloads only that subdirectory.
`url` accepts a full git URL or GitHub `owner/repo` shorthand. `path` is the subdirectory that holds the plugin, and Claude Code checks out only that subdirectory. Over an `https`
+2 −2 lines
Upstream edited 2 Oct 2026 06:05 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
errors
±changed
+15−3
claude-codechanged
errors
| `Failed to authenticate: OAuth token revoked` | [Authentication](#oauth-token-revoked-or-expired) |
| `Your account does not have access to Claude. Please login again or contact your administrator.` | [Authentication](#oauth-token-revoked-or-expired) |
**What to do:**
* Run `/login` to sign in again
+15 −3 lines
Upstream edited 2 Oct 2026 06:04 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
worktrees
±changed
+3−1
claude-codechanged
worktrees
For a `"fresh"` base, Claude Code keeps `origin/HEAD` current: when the repository hasn't been fetched in the last 24 hours, it fetches the default branch, capped at five seconds,
For a `"fresh"` base, Claude Code keeps `origin/HEAD` current: when the repository hasn't been fetched in the last 24 hours, it fetches the default branch, capped at five seconds,
This fetch never waits for input in your terminal. If git or ssh would ask for a password, a key passphrase, or confirmation of a new SSH host, the fetch fails instead and Claude C
+3 −1 lines
Upstream edited 2 Oct 2026 06:03 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
ultrareview
±changed
+3−3
claude-codechanged
ultrareview
Without arguments, ultrareview reviews the diff between your current branch and the default branch, including uncommitted and staged changes. For uncommitted changes to files named
For a branch review, Claude Code bundles the repository state and uploads it to a cloud sandbox; when you [review a pull request](#review-a-pull-request), Claude Code uploads nothi
Without arguments, ultrareview reviews the diff between your current branch and the default branch, including uncommitted and staged changes.
+3 −3 lines
Upstream edited 2 Oct 2026 06:03 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
claude-code-on-the-web
±changed
+21−3
claude-codechanged
claude-code-on-the-web
When you run `claude --cloud` from a repository that has no git remote, or from a github.com repository that the Claude GitHub App isn't installed on, Claude Code bundles your loca
On macOS, Linux, and WSL, Claude Code leaves uncommitted changes to files named like credentials or keys out of the upload and names the files it left out. This covers `.env` files
When you run `claude --cloud` from a repository that has no git remote, or from a github.com repository that the Claude GitHub App isn't installed on, Claude Code bundles your loca
+21 −3 lines
Upstream edited 2 Oct 2026 06:03 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
permission-modes
±changed
+2−2
claude-codechanged
permission-modes
* **A direct connection to the Anthropic API**: in an interactive terminal session, on every claude.ai plan and on accounts that use the Claude API, as Anthropic rolls it out. Requ
* **A direct connection to the Anthropic API**: in interactive terminal sessions and in `-p`, Agent SDK, [VS Code extension](/docs/en/vs-code), and [desktop app](/docs/en/desktop)
To skip asking the server and always use Claude Code's own classifier requests, set [`CLAUDE_CODE_AUTO_MODE_SERVER=0`](/docs/en/env-vars). On a direct connection to the Anthropic A
To skip asking the server and always use Claude Code's own classifier requests, set [`CLAUDE_CODE_AUTO_MODE_SERVER=0`](/docs/en/env-vars). On a direct connection to the Anthropic A
+2 −2 lines
Upstream edited 2 Oct 2026 06:01 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-docs
claude-tag/users/when-claude-responds
±changed
+1−1
claude-docschanged
claude-tag/users/when-claude-responds
Claude stops following that thread, and the rest of the channel is unaffected. This is the fix when one busy thread is the noise. The [`!mute` command](/docs/claude-tag/users/comma
Claude stops following that thread, and the rest of the channel is unaffected. This is the fix when one busy thread is the noise. The [`!mute` command](/docs/claude-tag/users/comma
+1 −1 lines
Upstream edited 2 Oct 2026 05:53 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-docs
claude-tag/users/commands
±changed
+4−6
claude-docschanged
claude-tag/users/commands
### Thumbs-down reactions and muting
### Thumbs-down button and muting
When someone reacts 👎 to one of Claude's replies in a thread, Claude mutes that thread and stops posting there. If Claude's [working session](/docs/claude-tag/concepts/how-it-works
Some of Claude's replies carry a thumbs-up and a thumbs-down button for rating the reply. When someone selects the thumbs-down button, Claude mutes that thread and stops posting th
```text wrap theme={null}
+4 −6 lines
Upstream edited 2 Oct 2026 05:53 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-docs
claude-tag/admins/troubleshooting
±changed
+2−2
claude-docschanged
claude-tag/admins/troubleshooting
* A notice that begins `:mute: Claude is muted in this thread` means the thread is muted and the session isn't stuck. A 👎 reaction on one of Claude's replies mutes the thread and p
* A notice that begins `:mute: Claude is muted in this thread` means the thread is muted and the session isn't stuck. Selecting the thumbs-down button under one of Claude's replies
To bring Claude back to a muted thread, send `@Claude !unmute` in the thread or @-mention Claude there, as [Thumbs-down reactions and muting](/docs/claude-tag/users/commands#thumbs
To bring Claude back to a muted thread, send `@Claude !unmute` in the thread or @-mention Claude there, as [Thumbs-down button and muting](/docs/claude-tag/users/commands#thumbs-do
+2 −2 lines
Upstream edited 2 Oct 2026 05:53 UTC Recorded here 2 Oct 2026 06:07 UTC
claude-code
self-hosted-environments-identity
±changed
+3−3
claude-codechanged
self-hosted-environments-identity
This command extracts the creator identity, preferring the SSO provider's subject, then the email address, then the creator's `act.sub` subject, `user:<id>` or `agent:<id>`:
This command extracts the creator identity, preferring the email address, then the creator's `act.sub` subject, `user:<id>` or `agent:<id>`:
"$CLAUDE_RUNNER_CLAUDE_BIN" self-hosted-runner decode-token | jq -re '.act.attested_by.sub // .act.email // .act.sub'
"$CLAUDE_RUNNER_CLAUDE_BIN" self-hosted-runner decode-token | jq -re '.act.email // .act.sub'
| `act.attested_by` | The upstream identity provider's attestation for the creating user, when available. `act.attested_by.sub` is the subject your SSO provider, such as Google or
+3 −3 lines
Upstream edited 2 Oct 2026 05:28 UTC Recorded here 2 Oct 2026 05:37 UTC
claude-code
self-hosted-environments-configuration
±changed
+2−2
claude-codechanged
self-hosted-environments-configuration
| `CLAUDE_CODE_SESSION_ACCESS_TOKEN` | The session JWT, prefixed `sk-ant-cc-`. Its `act` claim identifies the session creator, with the creator's email and upstream identity-provid
| `CLAUDE_CODE_SESSION_ACCESS_TOKEN` | The session JWT, prefixed `sk-ant-cc-`. Its `act` claim identifies the session creator, with the creator's email when the creating surface re
Use `jq -re` rather than `jq -r` when the extracted claim gates an auth decision, so an absent claim exits non-zero instead of passing the literal string `null` downstream. Session
Use `jq -re` rather than `jq -r` when the extracted claim gates an auth decision, so an absent claim exits non-zero instead of passing the literal string `null` downstream. Session
+2 −2 lines
Upstream edited 2 Oct 2026 05:28 UTC Recorded here 2 Oct 2026 05:37 UTC
claude-code
plugins/mods/reference
±changed
+1−1
claude-codechanged
plugins/mods/reference
| `$.ui.invalidate('ui.render')` redraws | Throttled to 10 a second, 30 for the visible pane and the band. Calls that come sooner are coalesced. |
| `$.ui.invalidate('ui.render')` redraws | Throttled to 10 a second, or 30 in the terminal for the visible pane, the expanded band, and the hint line under the prompt. Calls that c
+1 −1 lines
Upstream edited 2 Oct 2026 05:25 UTC Recorded here 2 Oct 2026 05:37 UTC
claude-code
plugins/mods/interface
±changed
+1−1
claude-codechanged
plugins/mods/interface
Claude Code throttles redraws of a site, so your mod can call `$.ui.invalidate` as often as its data changes. The visible pane and the band have a higher limit than other sites, an
Claude Code throttles redraws of a site, so your mod can call `$.ui.invalidate` as often as its data changes. For how often each site can redraw, see the [limits table](/docs/en/pl
+1 −1 lines
Upstream edited 2 Oct 2026 05:25 UTC Recorded here 2 Oct 2026 05:37 UTC
Nothing on this page matches that. Press Enter to search every page of the ledger.