One read of Claude Code CLIclaude-code-20260827T000702Z
4 pages moved out of 191 read.
Pages moved
4
significant first
Pages read
191
in this capture
Captured
00:07 UTC
Corpus hash
c9a2a247ec05
corpus-hash
What this read moved
1-4 of 4agent-view Changed · +21 / -0 lines
### The terminal host died or the session stopped responding #### Terminal host died #### Session isn't responding
from line 770
770770
771771The original conversation is intact; resume it with `claude --resume` or keep working in it. See the [error reference](/docs/en/errors#this-session-has-no-saved-transcript) for details.
772772
773### The terminal host died or the session stopped responding
774
775The [supervisor](#the-supervisor-process) runs each background session's terminal in its own host process. When that process dies or stops responding, Claude Code shows the reason and offers a restart; in both cases the conversation is saved and the restart resumes it. The [error reference](/docs/en/errors#terminal-host-process-died) quotes the full messages.
776
777Claude Code never restarts a row running a [shell command](#run-a-shell-command), from `Enter` or from `claude attach`, because that would run the command again; the row's message and `claude attach` both say the command isn't run again.
778
779#### Terminal host died
780
781On Linux and WSL, the supervisor checks each host process every few seconds, whether or not you open the session, and marks the session failed when the process has exited but its connection to the supervisor never closed.
782
783* In agent view, the row shows `terminal host process died — press Enter to restart`. Press `Enter` on it and Claude Code restarts the session on a fresh host process.
784* From the shell, `claude attach <id>` restarts a session already marked failed. Otherwise it reports the cause and exits, telling you to run `claude attach <id>` again.
785
786#### Session isn't responding
787
788When the supervisor accepts an open but no output arrives for about ten seconds, Claude Code ends the attempt and offers a restart. A session that merely stalled, for example across machine sleep, doesn't reach this offer: the supervisor [restarts it on open](#read-session-state) itself.
789
790* In agent view, the footer shows `Press enter again to restart this session — it isn't responding (its conversation is saved and resumes).` Press `Enter` on the same row again and Claude Code stops the unresponsive process and restarts the session; it stops nothing without that second press.
791* From the shell, `claude attach <id>` reports the cause and exits, telling you to run `claude stop <id>`, then `claude attach <id>`.
792
773793### A session fails before starting with a `possibly low memory` note
774794
775795When a background session's process exits before it finishes starting and the host is low on memory, the row's status names the exit and adds `possibly low memory — free some up and retry`.
from line 870
850870
851871| Version | Change |
852872| -------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
873| v2.1.247 | On Linux and WSL, a session [whose terminal host process died](#the-terminal-host-died-or-the-session-stopped-responding) fails within seconds with the reason. An open that produces no output ends after about ten seconds with a restart offer, and `Enter` on the row restarts the session with its conversation; `claude attach <id>` reports the cause and exits. Before this release, opening such a session showed `opening… · esc to cancel` indefinitely and `claude attach <id>` waited without reporting an error. |
853874| v2.1.239 | With [vim editor mode](/docs/en/interactive-mode#vim-editor-mode) on, pressing `Esc` in agent view's input switches from INSERT to NORMAL mode and keeps your text, matching the main prompt; in NORMAL mode with text still in the input, pressing `Esc` clears it, and pressing `Esc` on an empty input exits, as the [`Esc` shortcut](#keyboard-shortcuts) describes. Before this release, `Esc` cleared the input. |
854875| v2.1.233 | For a session linked to a GitLab merge request, Claude Code writes the row's label in GitLab's `!1234` reference syntax. You can also paste the merge request's URL into the [dispatch input](#filter-sessions) to select that session. Before this release, the label rendered as `#1234`, and a pasted merge request URL matched a session only when its first prompt contained the URL. |
855876| v2.1.227 | [Deleting a session](#what-deleting-a-session-removes) keeps the session and its worktree while another live Claude Code session is running inside that worktree directory. Agent view shows `not deleted` on the row and the reason in the footer, and `claude rm` prints `kept <id>` with the reason, which names the other session's process ID. Before this release, deleting the session removed the worktree while the other session was still working in it. |
errors Changed · +127 / -1 lines
### Terminal host process died
This page is larger than the 256 KiB this site keeps, so one side of the diff below stops where the stored text does.
from line 145
145145| `No conversation found with session ID: <session-id>` | [Command-line errors](#no-conversation-found-with-the-session-id) |
146146| `Cannot switch renderers in this session` | [Command-line errors](#cannot-switch-renderers-in-this-session) |
147147| `Cannot switch renderers while work is running in the background` | [Command-line errors](#cannot-switch-renderers-in-this-session) |
148| `Couldn't read your Zed keymap` / `Couldn't back up your Zed keymap` / `Couldn't update your Zed keymap` | [Command-line errors](#terminal-setup-left-your-zed-keymap-unchanged) |
149| `Your Zed keymap isn't a readable list of keybindings` | [Command-line errors](#terminal-setup-left-your-zed-keymap-unchanged) |
148150| `Marketplace "<name>" is registered from an untrusted source` | [Plugin errors](#marketplace-is-registered-from-an-untrusted-source) |
149151| `references ${user_config.*} in a shell-form command` | [Plugin errors](#plugin-command-references-user-config) |
150152| `Monitor "<name>" from plugin <plugin> references ${user_config.*} in its command` | [Plugin errors](#plugin-command-references-user-config) |
from line 168
166168| `blocked because the path is spelled in a form that cannot be safely resolved` | [Background session errors](#write-or-command-blocked-because-the-path-cannot-be-safely-resolved) |
167169| `blocked because the path is network-shaped` | [Background session errors](#write-or-command-blocked-because-the-path-names-a-network-location) |
168170| `This session has no saved transcript` | [Background session errors](#this-session-has-no-saved-transcript) |
171| `terminal host process died — press Enter to restart` / `This session's terminal host process died` | [Background session errors](#terminal-host-process-died) |
172| `Session isn't responding` / `Press enter again to restart this session — it isn't responding` | [Background session errors](#session-isnt-responding) |
169173| `This session was running agent '<name>', which is no longer available` | [Background session errors](#session-agent-no-longer-available) |
170174| `CLAUDE_CODE_PROCESS_WRAPPER: launcher ...` | [Background session errors](#claude_code_process_wrapper-launcher-errors) |
171175| `EUNKNOWN: unknown error, uv_spawn` | [Background session errors](#eunknown-when-starting-a-background-session) |
from line 179
175179| `Transcript writes are failing (...)` | [Session saving warnings](#transcript-writes-are-failing) |
176180| `Transcript saving is off — CLAUDE_CODE_SKIP_PROMPT_HISTORY is set` | [Session saving warnings](#transcript-saving-is-off-skip-prompt-history) |
177181| `Transcript saving is off — inherited CLAUDE_CODE_CHILD_SESSION marker` | [Session saving warnings](#transcript-saving-is-off-child-session-marker) |
182| `Claude Code's fullscreen renderer didn't finish starting last time on this machine` / `Claude Code's fullscreen renderer has repeatedly failed to start on this machine` | [Configuration warnings](#fullscreen-failed-start-notice) |
183| `Claude Code exited after an unrecoverable interface error (...)` | [Configuration warnings](#exited-after-an-unrecoverable-interface-error) |
178184| `Ignoring N permissions.allow entries from ... this workspace has not been trusted` | [Configuration warnings](#workspace-has-not-been-trusted) |
179185| `headersHelper not run — this workspace has no persisted trust` | [Configuration warnings](#headershelper-not-run) |
180186| `... is not matched by file permission checks` | [Configuration warnings](#is-not-matched-by-file-permission-checks) |
from line 2039
20332039
20342040* In a session started without those restrictions, run `/tui fullscreen`, or `/tui default` to switch back. Claude Code saves the [`tui` setting](/docs/en/settings-reference#tui) there
20352041
2042<h3 id="terminal-setup-left-your-zed-keymap-unchanged">
2043 /terminal-setup left your Zed keymap unchanged
2044</h3>
2045
2046You ran [`/terminal-setup`](/docs/en/terminal-config#enter-multiline-prompts) in Zed, and Claude Code couldn't complete the update to your Zed `keymap.json`, so it left the file as it was.
2047
2048Each message names the path to your keymap and ends with the keybinding block to add yourself:
2049
2050```text theme={null}
2051Couldn't update your Zed keymap, so it was left unchanged.
2052To add the binding yourself, add this block to the keymap array in <path to keymap.json>:
2053{ "context": "Terminal", "bindings": { "shift-enter": ["terminal::SendText", "\u001b\r"] } }
2054```
2055
2056The first line of the message names the cause:
2057
2058* `Couldn't read your Zed keymap, so it was left unchanged.`: Claude Code couldn't read the file, for example because of file permissions
2059* `Your Zed keymap isn't a readable list of keybindings, so it was left unchanged.`: the file read fine but doesn't parse as an array of keybinding blocks, even with `//` comments and trailing commas allowed
2060* `Couldn't back up your Zed keymap; not modifying it.`: Claude Code couldn't copy the file to a `.bak` backup beside it, so it changed nothing
2061* `Couldn't update your Zed keymap, so it was left unchanged.`: the merged result didn't verify as a valid keymap carrying the binding, so Claude Code discarded it instead of writing. A keybinding block with a duplicated key can cause this
2062
2063**What to do:**
2064
2065* Copy the block from the message into the top-level array in your `keymap.json` at the path the message names
2066* For `isn't a readable list of keybindings`, fix the syntax error, or make the file's top-level value an array, then run `/terminal-setup` again
2067
2068Before v2.1.247, `/terminal-setup` couldn't parse a Zed keymap that used `//` comments or trailing commas, and it replaced the entire file with only its own binding while reporting the binding as installed. To restore a keymap an earlier version replaced, use the `.bak` backup file described under [Enter multiline prompts](/docs/en/terminal-config#enter-multiline-prompts).
2069
20362070## Plugin errors
20372071
20382072These errors come from [plugin](/docs/en/plugins) and [marketplace](/docs/en/plugin-marketplaces) configuration. For plugin problems that don't produce one of the messages on this page, such as a marketplace URL that doesn't load or a plugin that installs but doesn't appear, see [Plugin troubleshooting](/docs/en/discover-plugins#troubleshooting).
from line 2376
23422376* To start the stopped session fresh anyway, run `claude respawn <id>` with the ID from the message, or press `Enter` twice on its row in agent view
23432377* If the session did finish a response and you still see this refusal on a version before v2.1.214, an unreadable folder in `~/.claude/projects` could make the transcript scan miss the saved conversation; update to v2.1.214 or later, which tolerates unreadable folders during the scan
23442378
2379### Terminal host process died
2380
2381Each [background session's](/docs/en/agent-view) terminal runs in a host process under the background service, and that process died while the service still held its connection, so the session couldn't be reached.
2382
2383On Linux and WSL, the background service checks each host process every few seconds, marks the session failed when the process has exited but its connection to the service never closed, and shows the reason on its row in [agent view](/docs/en/agent-view#read-session-state):
2384
2385```text theme={null}
2386terminal host process died — press Enter to restart
2387```
2388
2389If you open the row before the check runs, the footer shows `This session's terminal host process died (the conversation is saved) — press Enter to restart it` and the row turns failed.
2390
2391From the shell, `claude attach <id>` restarts a session already marked failed for a dead host, and otherwise prints the cause and exits:
2392
2393```text theme={null}
2394Couldn't attach to <id> — This session's terminal host process died (the conversation is saved) — run `claude attach <id>` again to restart it on a fresh host.
2395```
2396
2397The conversation is saved either way.
2398
2399A row running a [shell command](/docs/en/agent-view#run-a-shell-command) instead shows `terminal host process died — its output is gone; the command was not run again`, and `claude attach` prints `This command's terminal host process died — its output is gone and the command was not run again`. Claude Code never reruns the command for you.
2400
2401**What to do:**
2402
2403* In agent view, press `Enter` on the failed row; the session restarts on a fresh host process and the conversation resumes
2404* From the shell, run `claude attach <id>` again. Claude Code prints `Session <id>'s terminal host died — restarting it on a fresh one…` and reopens the session
2405* You can't restart a shell-command row this way; dispatch the command again to rerun it
2406
2407Before v2.1.247, a dead host process could pass every liveness check the background service ran, so opening the session showed `opening… · esc to cancel` indefinitely and `claude attach <id>` waited without reporting an error.
2408
2409<h3 id="session-isnt-responding">
2410 Session isn't responding
2411</h3>
2412
2413You opened a [background session](/docs/en/agent-view) and the background service accepted the open, but no output arrived for about ten seconds, so Claude Code concludes that the process relaying the session's terminal can't deliver output, and ends the attempt instead of waiting.
2414
2415In agent view, Claude Code offers a restart in the footer:
2416
2417```text theme={null}
2418Press enter again to restart this session — it isn't responding (its conversation is saved and resumes).
2419```
2420
2421From the shell, `claude attach <id>` prints the cause and exits:
2422
2423```text theme={null}
2424Couldn't attach to <id> — Session isn't responding — `claude stop <id>`, then `claude attach <id>` restarts it (the conversation is saved).
2425```
2426
2427Claude Code never restarts a row running a [shell command](/docs/en/agent-view#run-a-shell-command) for you, because a restart would run the command again.
2428
2429**What to do:**
2430
2431* In agent view, press `Enter` on the same row again. Claude Code stops the unresponsive process and restarts the session, and the conversation resumes. Nothing is stopped without that second press
2432* From the shell, run `claude stop <id>`, then `claude attach <id>`
2433* For a shell-command row, press `Ctrl+X` in agent view or run `claude stop <id>` to stop it; dispatch the command again to rerun it
2434
23452435<h3 id="session-agent-no-longer-available">
23462436 Session agent no longer available
23472437</h3>
from line 2518
24282518
24292519**What to do:**
24302520
2431* Open a new PowerShell window outside VS Code and run `where.exe claude`. If it doesn't print a path, the CLI isn't on your PATH: add its install directory by following [Verify your PATH](/docs/en/troubleshoot-install#verify-your-path). If it prints a path, the entry comes from your PowerShell profile or from a PATH change VS Code hasn't picked up yet; the next two steps cover those cases.
2432* Set the PATH entry as a user or system environment variable, not in your PowerShell profile. The extension doesn't run your profile, so a PATH edit that lives only there never reaches it.
2433* Restart VS Code after changing PATH. The extension checks the PATH that VS Code captured at startup, so a PATH change takes effect only after a restart.
2434
2435## Rewind warnings
2436
2437This warning comes from a [`/rewind`](/docs/en/checkpointing) code restore. It reports paths the restore refused to touch; the restore completed for every other tracked file.
2438
2439<h3 id="restored-the-code-but-skipped-files">
2440 Restored the code, but skipped files
2441</h3>
2442
2443A `/rewind` code restore skipped one or more tracked paths instead of writing or deleting through them. Claude Code skips a path when:
2444
2445* it is, or became, a symlink, hard link, or other non-regular file
2446* its directory changed since the checkpoint
2447* its backup can't be safely read
2448
2449Skipped paths keep their current contents. Before v2.1.216, `/rewind` wrote and deleted through links at tracked paths, and didn't report a partial restore.
2450
2451```text theme={null}
2452Restored the code, but skipped 2 files: the tracked path is (or became) a link or other non-regular file, its directory changed since the checkpoint, or its backup could not be safely read. Skipped files were left untouched — run with --debug for the paths.
2453```
2454
2455**What to do:**
2456
2457* Identify which files were skipped so you can handle each one with the steps below. The message gives only a count; the debug log at `~/.claude/debug/<session-id>.txt` names each skipped path as the restore runs, so turn on debug logging with `/debug` before your next restore. On macOS or Linux, you can instead find the links directly: `find . -type l` for symlinks and `find . -type f -links +1` for hard-linked files.
2458* If a skipped file is a link you created on purpose, such as a config file managed by a dotfile manager or a file hard-linked by tools like pnpm, the rewind left its contents alone. To undo the session's changes to it, ask Claude to reverse the edit or edit the file yourself
2459* If you didn't create the link, inspect the path before trusting its contents: something replaced the file after the checkpoint
2460
2461## Session saving warnings
2462
2463Claude Code shows these warnings on a persistent line below the input box when it isn't saving your session transcript. The session keeps working either way; the warnings tell you the session may be missing from [`--resume`](/docs/en/sessions) later.
2464
2465### Transcript writes are failing
2466
2467Claude Code saves the transcript to disk as you work, and its writes to [the transcript file](/docs/en/sessions#where-transcripts-are-stored) are failing. The message names the cause with the underlying error code, for example a full disk:
2468
2469```text theme={null}
2470Transcript writes are failing (disk full — ENOSPC) · recent messages may not be saved for resume
2471```
2472
2473The warning appears at different points depending on the error:
2474
2475* On the first failure for conditions that don't clear on their own: a full disk, an exceeded disk quota, a read-only filesystem, a path over the filesystem's length limit, or, on macOS and Linux, a permission error
2476* After repeated failures spanning at least a minute for everything else, including permission errors on Windows, where an antivirus scan can fail a single write that then succeeds on retry
2477
2478Before v2.1.217, Claude Code dropped the failing writes without a warning, and a later `--resume` missing recent messages was the first sign.
2479
2480**What to do:**
2481
2482* Fix the condition the error code names: free disk space for `ENOSPC`; raise or clear the quota for `EDQUOT`; restore write access to the transcript location for `EACCES`, `EPERM`, or `EROFS`
2483* The warning clears on its own at the next successful write; no restart is needed
2484* Messages sent while the warning was showing may still be missing when you resume the session later
2485
2486<h3 id="transcript-saving-is-off-skip-prompt-history">
2487 Transcript saving is off because CLAUDE\_CODE\_SKIP\_PROMPT\_HISTORY is set
2488</h3>
2489
2490This session started with [`CLAUDE_CODE_SKIP_PROMPT_HISTORY`](/docs/en/env-vars) set, so Claude Code writes no transcript or prompt history for it:
2491
2492```text theme={null}
2493Transcript saving is off — CLAUDE_CODE_SKIP_PROMPT_HISTORY is set · --resume will not find this session; if unintended, unset it and restart
2494```
2495
2496The variable is an intentional opt-out for ephemeral scripted sessions, but it can also reach a session through a shell profile, a wrapper script, or a parent process that exported it.
2497
2498**What to do:**
2499
2500* If you set the variable on purpose, no action is needed; the notice confirms the session won't appear in `--resume`, `--continue`, or up-arrow history
2501* If you didn't, remove the variable from the shell or script that launches `claude`, then start a new session. Messages from the current session aren't saved retroactively.
2502
2503<h3 id="transcript-saving-is-off-child-session-marker">
2504 Transcript saving is off because of an inherited CLAUDE\_CODE\_CHILD\_SESSION marker
2505</h3>
2506
2507Claude Code sets [`CLAUDE_CODE_CHILD_SESSION`](/docs/en/env-vars) in the subprocesses it spawns, and treats an interactive session that inherits it as nested: Claude Code saves no transcript for it, so sessions that Claude itself starts don't fill your `--resume` list. This notice means your current session inherited the marker:
2508
2509```text theme={null}
2510Transcript saving is off — inherited CLAUDE_CODE_CHILD_SESSION marker · restart with CLAUDE_CODE_FORCE_SESSION_PERSISTENCE=1 to keep future transcripts
2511```
2512
2513The notice is expected when you ran `claude` from inside another Claude Code session; it signals a misclassification when the marker leaked through a long-lived intermediary, for example a terminal, `screen` session, or launcher that a Claude Code session originally started.
2514
2515Inside tmux, Claude Code detects a marker that arrived through the tmux server's global environment and keeps saving, so this notice doesn't appear for that case.
2516
2517**What to do:**
2518
2519* If you started this session from inside another Claude Code session on purpose, no action is needed
2520* If this is a top-level session, exit and restart with [`CLAUDE_CODE_FORCE_SESSION_PERSISTENCE=1`](/docs/en/env-vars) set. Saving applies from the restart, so messages sent before it aren't saved.
2521* To fix future launches from the same terminal or launcher, remove `CLAUDE_CODE_CHILD_SESSION` from its environment
2522
2523## Configuration warnings
2524
2525Claude Code writes these messages to stderr rather than showing an error in the conversation, except where an entry notes that it writes the message to the debug log instead. It writes most of them at startup and writes the [unrecognized-model diagnostic line](#unrecognized-model-id-on-a-request) at request time.
2526
2527### Workspace has not been trusted
2528
2529Claude Code found `permissions.allow` rules or `permissions.additionalDirectories` entries in the project's `.claude/settings.json` or `.claude/settings.local.json` and didn't apply them, because [allow rules from project settings require workspace trust](/docs/en/permissions#project-allow-rules-and-workspace-trust). The count, the setting name, and the file named in the message vary with your configuration. `deny` and `ask` rules aren't affected.
2530
2531```text theme={null}
2532Ignoring 2 permis
2521* Open a new PowerShell window outside VS Code and run `where.exe claude`. If it doesn't print a path, the CLI isn't on your PATH: add its install directory by following [Ve
terminal-config Changed · +5 / -0 lines
from line 30
3030
3131In VS Code, Cursor, and Devin Desktop, `/terminal-setup` also updates two editor settings: it sets `terminal.integrated.gpuAcceleration` to `"off"` to prevent garbled text in the integrated terminal, and it sets `terminal.integrated.mouseWheelScrollSensitivity` for smoother scrolling in [fullscreen mode](/docs/en/fullscreen). To undo the GPU acceleration change, set it back to `"auto"` and reload the editor window. Before v2.1.157, `/terminal-setup` left GPU acceleration unchanged.
3232
33In Zed, `/terminal-setup` updates your `keymap.json` in place:
34
35* If the keymap already has bindings and none of them is a Terminal `shift-enter`, Claude Code first backs it up to a copy in the same directory, such as `keymap.json.1a2b3c4d.bak`, then merges the Shift+Enter binding into your keymap, keeping your other keybindings and comments
36* If Claude Code can't read or parse the keymap, can't back it up, or can't verify the merged result, it [leaves the file unchanged and prints the keybinding block to add yourself](/docs/en/errors#terminal-setup-left-your-zed-keymap-unchanged)
37
3338If you are running inside tmux, Shift+Enter also requires the [tmux configuration below](#configure-tmux) even when the outer terminal supports it.
3439
3540To bind newline to a different key, or to swap behavior so Enter inserts a newline and Shift+Enter submits, map the `chat:newline` and `chat:submit` actions in your [keybindings file](/docs/en/keybindings).
commands Changed · +1 / -1 lines
from line 131
131131| `/setup-bedrock` | Configure [Amazon Bedrock](/docs/en/amazon-bedrock) authentication, region, and model pins through an interactive wizard. [Hidden from the command menu](#how-the-command-menu-matches-what-you-type) until `CLAUDE_CODE_USE_BEDROCK=1` is set; type it in full. First-time Amazon Bedrock users can also access this wizard from the login screen |
132132| `/setup-vertex` | Configure [Google Cloud's Agent Platform](/docs/en/google-vertex-ai) authentication, project, region, and model pins through an interactive wizard. [Hidden from the command menu](#how-the-command-menu-matches-what-you-type) until `CLAUDE_CODE_USE_VERTEX=1` is set; type it in full. First-time Google Cloud's Agent Platform users can also access this wizard from the login screen |
133133| `/simplify [target]` | **[Skill](/docs/en/skills#bundled-skills).** Review the changed code for cleanup opportunities and apply the fixes. Four review [agents](/docs/en/sub-agents) run in parallel, covering reuse of existing helpers, simplification, efficiency, and whether the change is at the right level of abstraction. From v2.1.154, the review doesn't look for correctness bugs. Use `/code-review` to find bugs. On earlier versions, `/simplify` is equivalent to `/code-review --fix`. Pass a path or PR reference to review a specific target |
134| `/skills` | List available [skills](/docs/en/skills). Type to filter the list by name. Press `t` to sort by token count. Press `Space` to [cycle a skill's visibility to Claude and the `/` menu](/docs/en/skills#override-skill-visibility-from-settings) |
134| `/skills` | List available [skills](/docs/en/skills). Type to filter the list by name, description, or source. Press `t` to sort by token count, `Space` or `Enter` to [cycle a skill's visibility to Claude and the `/` menu](/docs/en/skills#override-skill-visibility-from-settings), and `Esc` to save and close. You can't cycle plugin skills, skills whose frontmatter sets `disable-model-invocation: true`, or skills with a `skillOverrides` entry in managed settings or the `--settings` flag |
135135| `/stats` | Alias for `/usage`. Opens on the Stats tab |
136136| `/status` | Open the Settings interface on the Status tab, showing version, model, account, and connectivity. A `Session kind` row reads `background job · attached` or `background job · unattended` in a [background session](/docs/en/agent-view), depending on whether a terminal is attached, and `interactive` in any other session. Before v2.1.221, `/status` didn't show this row. Works while Claude is responding |
137137| `/statusline` | Configure Claude Code's [status line](/docs/en/statusline). Describe what you want, or run without arguments to auto-configure from your shell prompt |